Packs/Racks/Baskets

B-RAD, which stands for Bottle Relocation and Accessory Device, is a system for organizing on-bike accessory storage using bottle cage mounts. Used alone to shift bottle cage location for clearance, or combine with other B-RAD accessories to carry tools, tubes pumps or a 2nd bottle on downtubes. - Single bottle mount with two slotted holes for adjustments up to 4mm +/- 10mm - Designed to maximize bottle capacity on small frame bikes and dual suspension frames

B-RAD, which stands for Bottle Relocation and Accessory Device, is a system for organizing on-bike accessory storage using bottle cage mounts. Used alone to shift bottle cage location for clearance, or combine with other B-RAD accessories to carry tools, tubes pumps or a 2nd bottle on downtubes. - Three slots for additional adjustments over the B-RAD 2 base - Compatible with triple bottle mounts on forks or frames, use neoprene pad and zip tie for use with standard bottle cage mounts

B-RAD, which stands for Bottle Relocation and Accessory Device, is a system for organizing on-bike accessory storage using bottle cage mounts. Used alone to shift bottle cage location for clearance, or combine with other B-RAD accessories to carry tools, tubes pumps or a 2nd bottle on downtubes. - Long, four-slotted mount allows two, smaller bottles to be mounted in-line - Compatible with triple bottle mounts on forks or frames, use included neoprene pad and zip tie for use with standard bottle cage mounts

The B-RAD Accessory Strap Mount is designed to add an additional strap point for tire levers, tubes or CO2 cartridges. Mounts to bottle bosses, or to the B-RAD base for additional carrying options. - Mounts to bottle bosses, or to the B-Rad base for additional carrying options - Main strap is 50mm wide and holds loads 75-120mm diameter (3 - 4.75 inches) - Cradle strap is 40mm wide and 350mm long for supporting loads

The B-RAD Roll Top Dry Bag has enough capacity to keep a handful of items dry and clean. Multiple mounting options ensure it can be adapted to fit nearly any bike. - 1l capacity - Includes mounting plate

The USWE Outlander 3L is a lightweight 3L race pack with a super smart external on/off organizer pocket for tools and gear. This unique on/off solution make s it possible for you to strip off the pocket and go superlight (2L) when you're in that race mode. The pack is designed with the NDM 4- point harness that makes the pack bounce free and gives stretch support for maximum breathing capacity. Equipped with a 1.SL Hydrapak Elite hydration bladder with a Slide-Seal top for easier cleaning and filling.

Topeak's Explorer Tubular Rack is a great add-on for carrying a trunk bag, pannier or anything else you want to strap on. It's made of tubular aluminum, fits most bikes, and has a center strip that acts like a short fender, too.

- Integrated top plate for quick-mount MTX 1.0, 2.0, and RX trunk bags - Integrated fender top - 6061-T6 alloy construction - Spring clip for additional cargo security - Designed for compatibility with disc brakes - 800g - 55lb weight capacity

MTX QuickTrack compatible TrunkBag featuring a divided main compartment constructed with Topeak's unique process of combining rigid panels and flexible fabric for structure and water repellency. Features two mesh side compartments for extra capacity and a rear water bottle holder that lets you carry more water on extended trips. - Attachments: 1 divided main compartment, two mesh side pockets - Capacity: 8L / 480 ci - Size (L x W x H): 35 x 21 x 19 cm / 14.2” x 8.3” x 7.5” - Weight: 870 g / 1.92 lb Added Features: - Water bottle holder Shoulder strap - Carrying handle - Elastic top bungees - 3M reflective strip - Safety light clip - Optional rain cover

Protect your TrunkBag and the gear inside with Topeak's Rain Cover. Easily packable, the Rain Cover fits Topeak's TrunkBag DX & EX (sold separately).

Similar to the original MATTONE, a high friction Hypalon strap with BOA Closure completes the package. Making more than 15x the power of Velcro, the BOA Closure uses a ratcheting mechanism that will not creep or loosen even under the most extreme vibration and impact. This ensures the MATTONE will remain 'high and tight' under your saddle until you need to access it... no swinging, swaying, or rattling... ever

Named after the Italian word for Brick, Mattone is a water-resistant, ultra-compact seat bag that attaches to the rails using the BOA Closure System.  Unique zipper design allows it to be accessed while on the bike, or to open like a book when removed from the bike for easy access. Mattone is for the cyclist looking to carry a spare tube, CO2, multi-tool, and some cash in a discreet, water-resistant package. Internal divider holds ID, credit card, or cash while also protecting your tube from your multi-tool! Seat bag users fall into two categories: Seat Roll aficionados and seat bag users. Traditionally, seat bags have been simple open spaces that allowed content to jangle about, making noise and rubbing against each other. Often times a spare tube was pulled out of a seat bag to reveal it was more full of holes than the tube being replaced due to friction against a house key or multi-tool. With Mattone, we designed a layout similar to a book, where the bag can fully open to hold the tube and CO2 cartridge on one side, separated by a padded ballistic nylon 'page' separating it from the other side where you can store an inflator head, multi-tool, contact lens case, etc. The 'page' also contains a slot for a credit card, ID, money, or house key. The unique off-center Aquaguard Zipper allows the case to completely open and lay flat when off the bike, while also allowing easy access to the multi-tool and money/card slots when on the bike without risk of spilling all the contents of the bag. A high-friction Hypalon strap with BOA Closure completes the package. Making more than 15x the power of Velcro, the BOA Closure uses a ratcheting mechanism that will not creep or loosen even under the most extreme vibration and impact. This ensures the Mattone will remain 'high and tight' under your saddle until you need to access it...no swinging, swaying, or rattling...ever. - Exterior—Sleek black finish with reflective graphics - Interior—Hi-contrast red material with separate ID, credit card, or money flap - Interior Volume—Holds one inner tube, one CO2 cartridge, one tire lever (all of these components are sold separately and are not included) - BOA Closure System with open guide release on Hypalon retaining strap - YKK Aquaguard zipper - Outside Dimensions: 13cm x 8.5cm x 5.5cm - Volume: Approximately .61 L - Strap Measurements: 27cm x 4.5cm

Seat Capsule Premio is our BOA-powered saddlebag option for those that prefer more structure and internal volume than what a seat roll has to offer. A high-strength thermoformed shell creates a modular structure with two internal dividers that help keep everything organized. The capsule is secured to the bike using the BOA Closure System, and features a Rail Guard for superior grip and protection of the saddle rails. The zipper is a YKK locking model that bisects the lower third of the bag. Our designer chose this low position to make it easier to access the bag while it's still attached to the saddle; a key difference between a seat bag and a seat roll. - High strength Thermoformed shell - Boa Closure System with Guide - Rail Guard protects and grips saddle rails - YKK Locking Zipper - NO Velcro to damage your seat post or inner short legs - 625cc Internal Volume

Seat Roll Asymmetrico takes everything we've learned in 5 years of producing the award-winning Seat Roll Premio and kicks it up a notch with lighter materials, reduced bulk, improved abrasion resistance, an extra pocket, and a unique asymmetric design which allows you to pack more into a smaller volume, oh, and room for up to 700x45 (29x1.75") tubes! - 2-Ply Ballistic Nylon Construction with Hypalon outer jacket - Boa L6 Closure System with Lace Guide - Padded Rail Guard protects saddle rails and speeds Installation - FOUR internal pockets: Holds tubes up to 700x45mm - Black reflective printing provide stealthy HI-VIS in low-light conditions - Weight: 85 grams

The Alternator 135 Low Deck fits Salsa 135mm-spaced, Alternator dropout equipped frames using a non-plus-sized tire. It features a lower and narrower deck that fits better over and around tires up to 29 x 2.1" (without fenders), as well as 700c and fender setups. - NOTE: Deck requires a minimum of 320mm clearance from seatstay mounting points - NOTE: Salsa Rack-Lock needed for frames without upper seatstay mounts - Tubular 6061-T6 aluminum construction - 135 x 345mm cupped deck - Extra-long struts for improved range of fit; straight and shaped (kinked) struts included - Black powder coat finish - 765 grams - Weight Limit (lbs): 59.5 lbs.

The Salsa EXP Series Anything Cage Bag is designed to hold your gear on the Salsa Anything Cage and Anything Cage HD mounting systems. This bag protects contents from the elements while keeping weight low to the ground. - Designed to fit Salsa Anything Cage and Anything Cage HD (sold separately) - Quick-release roll-top closure for easy accessibility - Two Hypalon daisy chains for multiple secure attachment points - Molded TPU base helps keep bag upright even when off the bike - Primary Material: 400D Nylon with TPU Base - Weight: 128g

The Salsa EXP Series Anything Cage HD is a unique cargo mounting system that allows you to carry lightweight gear or large bottles on forks and down tubes that have Three-Pack mounts. - Versatile system designed for the Salsa Anything Cage Bag with EXP Series Rubber Straps (included) or nylon EXP Series Anything Cradle Straps - Constructed with glass-filled nylon for strength and durability - Holds gear low on fork blades or down tubes with Three-Pack mounts - Includes Anything Cage HD with hardware and two 20" Salsa EXP Rubber Straps - Maximum load: 6.6 lb (3kg)

The EXP Series Top Tube Bag provides easy access to food and gear on quick rides or bikepacking adventures. It bolts directly to Salsa frames equipped with top tube mounts or attaches to nearly any bicycle with the included hook-and-loop strap. - Waterproof fabric, water-repellent zipper, and welded construction keep contents dry - Closed-cell foam internal structure provides rigidity - Cord port for batteries and charging - Length: 190mm - Width: 30mm top, 50mm at base - Height: 80mm at front, tapering to 55mm - Total volume: 65.4 cubic inches

- Waterproof - Reflective Elements - Mount for clip on light - Spacers for handlebar spacing - 9 Liters 700x315mm - 2.4 gallon 27.6x12.4in

Lightweight, functional, and aerodynamic. The slim Racer bicycle bag is made of durable, water-resistant fabric that integrates nicely with a racing bike. This bag offers sufficient space for tools, replacement tubes, and personal items. Reflective elements, like the SKS logo, add safety. The stylish bag also features a laminated zipper with ergonomic easy-zip, a secure inside pocket, and an orange lining to make finding items easier. - Sporty frame bag with a secure hold - Mounts in a way to avoid damage to frame - Durable rubberized hook and loop fastener - EASYZIP - Aerodynamic and lightweight - Water-repellent - Reflective - Measures 250 x 40 x 90mm - Weight: 124g

The Mountain Feedbag is an on-the-go aid station for endurance riding. It offers ample food storage with fumble-free, one-handed access via an innovative drawcord system. Slightly larger than the previous version, you can now easily fit your beloved 1L Nalgene bottle, camera lenses, and more. It also features an additional outside pocket, leaving you with more space for wrappers, sunscreen, granola bars, and other small items. Mountain Feedbags also work well as bike-mounted lens cases for mirrorless camera systems. Features: - Super-fast, one-handed (really!) opening and closure with no fumbling to grab cord locks - Three external pockets for gels and trash - Three-layer construction: outer fabric, foam, and liner. Foam adds stiffness and insulates. - Bright yellow interior liner snaps in place and is easily flipped for cleaning - Mounts to either side of stem with adjustable attachment points - run two for tons of storage - Easily used in combination with a Sweetroll or Harness handlebar system - Fits bike water bottles, Nalgene bottles, and bear spray cans - Weight: 3.7oz - Materials: Revelate exclusive VX 21 polyurethane coated X-pac; 420 denier yellow lining - Made in the USA with domestic and imported materials

The 14L Terrapin® System is a modular, waterproof seat pack with a removable drybag that allows for easy packing off the bike. Approaching nearly a decade since it's first design, this generation of Terrapin has improvements on the stability, ease of use, and durability of the bag. Sharing features with our award-winning 8L Terrapin System, the 14L Terrapin System features Revelate's exclusive Indie-Rail attachment system. A progression from conventional bikepacking bag mounts where the rail straps are fixed to the top center of the bag, with Indie-Rail each saddle rail is cinched down hard to the sides of the bag. This feature virtually eliminates side to side bag sway without the need for external hardware. This is combined with a rigid internal structure and active cam buckles to prevent straps from slipping on rough terrain. The Terrapin features an external plastic bottom sheet which acts as a fender to protect the bottom of the bag from kicked up debris. Stiffened on all sides, a composite internal top sheet provides a solid and stable platform for the strap points and transmits the vertical load to the seatpost connection. An external webbing and loop system houses a bungee and provides additional easy access external storage

We set out to create the most stable, low profile mounted, feature loaded, waterproof seat bag available. The Spinelock seat bag checks all the boxes. The Spinelock integrates user tested and approved features like a one-way air purge valve, rear light slots, loop and bungee deck, and an external plastic bottom with a new patented attachment system. Stability was the driving element in the design process. If you want something you can pack and forget, the Spinelock is your seat bag. There are two size options, neither of which sacrifice features for capacity. The smaller but largely versatile Spinelock 10L maximizes your carry with minimal tire clearance and provides a generous amount of waterproof storage with additional space on the external corded deck. . If you are going on a long expedition or carrying cold weather gear we recommend checking out the Spinelock 16L. How it works: - The Spinelock stability system consists of three components: the saddle clamp, seat bag mounted "Spine" baseplate, and pin. - A low profile, high strength, forged aluminum clamp works in combination with precision IGUS bushings to form the pin interface. Twin forged upper arms, fastened by Torx-25 bolts, rotate into position above the saddle rails for easy mounting. - Resembling a spine ramp familiar to skateboarders, the "Spine" baseplate is made of an impact resistant UV-stabilized nylon and is integrated to the seat bag surface. The plate features two mounting positions to accommodate seatpost setback and saddle adjustments. To connect the bag, you simply line up your selected mounting position to the seat mounted clamp and slide the pin through the aligned holes. Attaching the side compression straps to the wings of the clamp fixes the pin in place and you're ready to ride!

Free Your Pockets Why carry your tools yourself? Strap them to your bike and forget about them until you actually need them. Enough room for a CO2 cartridge, a small selection of tools + tire levers, and a spare tube. - Stretch hook-and-loop strap adjustment - Ripstop nylon construction - Printed silicone grip - Tri-fold design - 3 inner pockets

Weighing next to nothing and unusually practical, the Cockpit-Pack helps to secure your personal fuel supply by giving you direct, one-handed access to your favorite snack while you continue to ride. The large opening ensures that you’ll immediately find what you need. Whether you want quick access to your snack, smartphone, or camera, they can all be optimally stowed in the Cockpit-Pack. Thanks to the stiffened material on the inside, the bag retains its shape at all times and can be easily opened and closed. The 82-gram, lightweight Cockpit-Bag is waterproof and attaches easily with its extra-strong Velcro straps to your top tube and head tube or to your top tube and seat tube FURTHER FEATURES: - Fits on MTBs (full-suspension and hardtails), road bikes, and hybrid bikes - Can also be attached to your top tube and seatpost

Bikepacking is also about embracing minimalism. You head off on your bike into the great outdoors, away from it all for an extended period. The amount of gear you can take is limited! The ORTLIEB Frame-Pack allows you to exploit your bike frame to create valuable stowage. Thanks to its lower center of gravity below your top tube, the Frame-Pack makes for an ideal stowage location for heavy gear such as tools, camping stoves, and food supplies. The proven, waterproof nylon fabric and the waterproof zipper ensure that your things remain absolutely dry even in the most inclement weather. Mounting the Frame-Pack with the ultra-strong Velcro straps to the top tube, seat tube, and down tube is a snap. The Frame-Pack is available in a 4-liter size and a 6-liter size – depending on the size of your bike frame.

ORTLIEB's frame bag with roll closure helps you start off your bike packing adventure well-prepared. Thanks to the waterproof roll closure —which is closed by three silicone rings— paired with the proven nylon fabric, your luggage inside the bag stays absolutely dry even in the most adverse conditions. The Frame-Pack RC is ideal for storing heavy luggage, such as tools or food, centrally on the bike. This maintains a low center of gravity so that the trail fun remains high even when fully loaded. The roll closure and its large opening allow easy access and easy packing of the bag. The assembly within the frame triangle is done with strong and robust Velcro fasteners. The specific positioning of the Velcro straps along the circumference of the bag enables individual adjustment to the dimensions of your bike. The Frame Pack RC is available in two sizes —4 and 6 liters — and suitable for mounting on carbon frames. The bag is PVC-free and sustainably made in Germany. FEATURES: - Reflective logo on both sides of the bag

The Frame-Pack RC Toptube is the solution for everyone who likes to have access to their water bottles while also carrying gear inside the bike frame triangle. This waterproof frame bag with roll closure is also ideal for full suspension mountain bikes, where space inside the frame's triangle is limited by the shocks. Part of ORTLIEB's bikepacking series, this bag with roll closure meets the IP64 standard for waterproofness, meaning your gear is fully protected from an involuntary bath. With its 4 liter volume, the Frame-Pack RC Toptube enables heavy equipment such as tent poles, tools or food to be carried within the frame triangle, maintaining the bike's low center of gravity. The customizable, sturdy, and strong Velcro fasteners enable simple and easy fastening and an uncomplicated installation. The frame pack RC Toptube is made in Germany and PVC-free. Together with the other products from the ORTLIEB bikepacking series, the frame pack RC Toptube forms the ideal equipment for an overnighter, a self-supported race, or your next big adventure. FEATURES: - Reflective logo on both sides of the bag

The ORTLIEB Toptube Frame-Pack is the smart solution for all who want to use their frame's main triangle for storage space without having to do without their water bottle. The solution also works for those who have full-suspension mountain bikes with limited triangle space. With its 4-liter payload, the Toptube Frame-Pack provides plenty of space for heavy equipment such as tent poles, tools, and food supplies, while also helping to secure a low center for improved rising performance. And given that the bag and its zipper are waterproof, you can even cross rivers on your bikepacking tour without worrying about your stuff getting wet. The Frame-Pack attaches easily to your top tube and seat tube with the help of sturdy and highly adhesive Velcro straps. FURTHER FEATURES: - Ideal for all bikes with limited triangle space - Reflecting logo ADVICE: Suitable for carbon fiber frame.

Ideal for multiday tours and self-supported races, the ORTLIEB Gravel-Pack duo offers you a combined payload of 25 liters for additional gear such as mess kits, food, and other "luxury" items. Mounting the Pack to your lowrider bike rack allows you to maintain a low center of gravity and undiminished off-road agility despite your extra gear. While the Pack's streamlined design – without inside pockets and a shoulder-strap pad – helps to keep it in the featherweight class, its lightweight, wear-resistant material withstands even the harshest of rock and gravel conditions you encounter on your way. And, no matter how wet the weather, your things will stay dry thanks to the proven ORTLIEB-waterproof quality and roll closure. With the QL2.1 system and two mounting hooks, the Gravel-Pack remains tightly attached to your bike rack while you ride over hill and dale on your gravel grinder, mountain bike or fatbike.

Thanks to the unique Seat-Lock attachment system, the Seat-Pack QR is quickly and securely mounted and just as speedily removed, completely residue-free. An adapter even enables the use of a dropper post, making the innovative Seat-Pack QR suitable for a variety of bikes. DETAILS Whether you're riding singletrack, mountain passes or gravel routes, with the waterproof Seat-Pack QR you are ready for every bike adventure. With the innovative and patented Seat-Lock attachment system and abrasion-resistant nylon fabric, the bag is super stable, quickly mounted and just as quickly removed without leaving any residue. And with the help of a special adapter of just 4.3 centimeter in width, this bag can even be used with a dropper post. The internal reinforcement and five compression straps ensure that the contents are packed tightly and securely. A valve with a handle strap helps to compress the pack volume, and the elastic cord on the outside allows for the attachment of additional gear. To prevent damage from tire contact, a protective plate is attached to the underside of the Seat-Pack QR, which also doubles as a fender. OTHER PRACTICAL FEATURES: - Our reflector ensures added visibility and safety - A daisy chain allows for the attaching of a rear light COMPATIBILITY NOTICE YOU CAN EASILY CHECK IF YOUR SADDLE IS COMPATIBLE: 1. The saddle rails must have a bend of at least 34°. 2. The seat post clamp must be at least 13mm from the middle of the bend in the saddle rail. There must also be at least 13mm from the middle of the bend to where the rail connects to the back of the saddle. 3. The bottom edge of the saddle (at the side) must be at least 14mm higher than the bottom edge of the saddle rail.

Good news for all of those on the lookout for a convenient, waterproof bag to transport their belongings: the proven ORTLIEB "bike trunk" is now available with a Velcro roll closure! The closure of the Trunk-Bag RC (Roll-Closure) also serves as a convenient carrying handle. With a 12-liter payload and a shoulder strap, the waterproof bag that mounts on top of your bike rack is ideally suited for longer tours and brief forays to the supermarket. Even when the bag is fully loaded, your smartphone, wallet, and keychain remain quickly accessible thanks to the inside pocket and carabiner, as well as an additional, non-waterproof exterior pouch. The Rack-Lock Adapter, the winner of the Eurobike Award, ensures that the bag fits on virtually any bike rack with a width of 60 to 160 mm. Clip it on, secure it and remove it again. It's a snap!

The Lizard Skins Tube Strap is an easy way to stow a spare tube. The minimally designed Tube Strap is a lightweight on-bike storage solution for any rider. This versatile strap is made to securely attach under seats and other locations on bike frames. - On-bike storage solution - Inner sleeve to compress a tube - Silicone strips for stability - Compact and lightweight - Attach under the seat or other locations on the bike frame - Weight 1.3oz (37g)

The Lizard Skins Utility Strap is an easy way to stow essential tools and a spare tube. The minimally designed Utility Strap is a lightweight on-bike storage solution for any rider. This versatile system is made to securely attach under seats and other locations on bike frames. The Utility Strap has a wide strap and durable metal buckle. - On-bike storage solution - Inner sleeve to compress the tube - Multiple spots for tools: CO2, Tire Lever, Multi-tool, etc. - Wide strap and durable metal buckle - Silicone and rubber grip for stability - Compact and lightweight - Attach under the seat or other locations on the bike frame - Weight 4oz

Lezyne's M-Caddy with Sport Repair Kit is a complete and convenient kit for the rider with simple reliability in mind. It features a Sport Drive HP hand pump, RAP 6 multi-tool, Smart Kit for tire repair, and Matrix tire levers in an M-Caddy bag that tucks neatly under your bicycle seat. Be prepared with all the essentials needed for an unexpected repair whether you're out on a long weekend jaunt or daily commute.

A complete saddle bag kit built on the M Caddy saddle bag and loaded with our RAP II-19 CO2 multi-tool, Classic Tubeless Kit, Tubeless Power Levers, and two 20-gram CO2 cartridges. It's your one-stop shop to prepare yourself for just about any tubeless repair, perfect for any cyclist running tubeless tires.

Lezyne's Smart Energy Caddy is a lightweight, semi-rigid, top-tube-mounted smart phone caddy made from molded EVA foam with a durable woven nylon cover. Its clamshell pod design opens to provide easy access, and a mesh divider helps keep items in place. The Smart Energy Caddy's smart phone pocket holds any popular 4-5" phone model, and features a clear touch screen-compatible panel for full control of your phone. Three Velcro straps attach your caddy to your bike's top tube.

Genuine Bontrager BackRack parts ensure proper rack-to-bike connection. Details: - Parts and accessories for past and present BackRacks - Pre-2009 BackRacks use stamped steel struts - Post-2009 use tubular alloy struts - Cargo net is made of stretch webbing and attaches to any BackRack via nylon hooks - S-bend mono stay attachment provides additional mounting options for BackRack 1 and 2 - BackRack 2009 parts kit also works with BackRack Lightweight

Genuine replacement parts for your Interchange bag system. - The perfect accessory for when you have multiple bikes or just need a replacement. - Interchange bracket for Quick Cleat - Rugged and lightweight plastic construction - Easy on, easy off storage

Make your fat bike a load-hauling master with Axiom's Fatliner. It's disc compatible, and it's made from rugged 6061 T6 aluminum to keep strength to the max and weight to a minimum. There are plenty of mounting options to accommodate all sorts of fat bikes, and it fits dropouts from 170 to 190mm apart. Get fat, get loaded, and go adventure with the Fatliner.

A high-volume under-the-seat bag and water bottle pocket designed specifically for the gran fondo cyclist. Every Seymour bag is created using Oceanweave – Axiom’s new lightweight and durable fabric made from reclaimed fishnet – to help reduce the amount of harmful plastics in our oceans. CONSTRUCTION - OCEANWEAVE 600D recycled fishnet polyester with waterproof polyurethane coating - Red interior liner improves internal visibility MOUNTING SYSTEM - Lightweight Velcro saddle-mounting system ADDED BENEFIT - Zippered flap opening for easy access to bag contents while bag is on bike - Interior credit card / ID pocket - Integrated waterbottle holder - Ultra-visible 3M triangle logo - LED light clip - Volume 1.3 L / 79 cu in - Weight 126g / 0.28 lbs

Axiom's Streamliner 29er DLX Rack centers loads close to the rear wheel for improved stability and handling on your 29er bike. It's made of reliable and lightweight aluminum, features struts to keep loads from getting close to the rear wheel, and offers ample heel clearance when you're carrying panniers.

An extended secure space for storing frequently-used items, whatever the terrain. The Backcountry Long Top Tube Pack is a convenient space to store frequently used items, particularly on mountain bikes with sloping top tubes or limited space inside the main frame triangle. The long top tube bag for mountain bikes is ideal for stashing snacks, light valuables and electronic devices. It features an internal divider and mesh pocket and securely attaches to the top tube with Hypalon-reinforced velcro straps to minimise abrasion. A one-finger two-way waterproof zipper puller allows easy access on the move and safeguards contents against water and dirt when closed. The long top tube bag also features a padded foam base to protect contents and a battery lead port for charging electronic devices on the go. Materials The Backcountry Long Top Tube Pack is made from Dimension-Polyant VX21, a four-layer laminated fabric originally developed for the maritime industry and our proprietary 420D nylon; a rugged fabric made to our own exacting specifications for durability and waterproofing. Designed to fit the demands of off-road riding, these materials offer full waterproofing, light weight, low stretch, and high abrasion and tear resistance. Notably, it's welded together at the seams, creating a watertight seal that ensures the saddle bag remains completely waterproof Care Hand wash, using a mild diluted soap if necessary. Afterwards, let it air dry. Do not machine wash, machine dry, or iron. Features - Fully waterproof two-way zipper - Protected cable port - Slim-line design to avoid knee rub - Internal pocket for organization - Reflective graphics for enhanced visibility - Ultra-durable, lightweight body fabric

The Expedition Frame Pack is designed for storing items within the main triangle, creating a lower center of gravity and enabling more natural bike handling. The frame bag securely fastens to the top tube with Velcro straps, and is useful for storing heavier items as part of a larger bikepacking setup. The result is an even, balanced load, making longer tours and multi-day trips more comfortable. The frame bag is equally useful when used on its own for storing essentials on a daily commute. It’s constructed from a lightweight fabric, custom milled to Apidura’s specifications and welded together at the seams to create a watertight seal. Zippers with protected closures ensure that kit stays dry, even in a sustained downpour. A battery lead/hydration hose port is handy for charging devices or staying hydrated on the road. Features - Two versions to suit both tall and compact head tubes - Interior storage pocket for organization - Lightweight waterproof laminate, developed specifically for Apidura - Carbon-friendly adjustable strap positioning - Protected battery/hydration hose port - Reflective graphics for increased visibility Materials - The frame bag is cut from a three-layer laminate fabric that was developed specifically for Apidura. The material is lightweight, and is highly resistant to tears and abrasion. Notably, it’s welded together at the seams, creating a watertight seal that ensures complete waterproofing. Care - Hand wash, using a mild diluted soap if necessary. Afterwards, let the Frame bag air dry. - Do not machine wash, machine dry, or iron.

Ideal for carrying lightweight, compressible kit, the Expedition Handlebar Pack is a handy partner for long-distance road tours, weekend trips, or even a daily ride to work. Eliminating the need for a bulky front rack, the Pack fastens to handlebars with a reinforced attachment system that adds stability while improving handling and preventing abrasion. Dual roll-top closure keeps the contents secure, while allowing flexible packing capacity. A hands-free air release vent makes compressing the Pack hassle-free, while welded seams ensure that contents stay dry in all conditions. Materials The Expedition Handlebar Pack is cut from a three-layer laminate fabric that was developed specifically for Apidura. The material is lightweight, and is highly resistant to tears and abrasion. Notably, it’s welded together at the seams, creating a watertight seal that ensures complete waterproofing. The Handlebar Pack’s attachment points are reinforced with Hypalon, a rubberized nylon used to provide extra protection against friction and abrasion. For the straps, we’ve chosen Woojin buckles for their strength and reliability.

A useful standalone bag for daily riding or as part of a larger bikepacking setup, the Expedition Top Tube Pack is a lightweight, secure storage space that’s ideal for stashing frequently used items on the road. Available in 0.5L and 1L volumes, the smaller top tube bag is suited for storing bars and snacks, while the larger version can also accommodate smartphones and battery packs. It fastens securely to the top tube, opening and closing via an easy access one-finger zipper puller. Adjustable attachment points ensure that the bag is versatile enough for a range of different frames. The top tube bag is equipped with an innovative waterproof slider. While it looks like a normal zip, it’s better — it’s fully waterproof. However, it does need a little more care than a regular zipper, as excess strain can cause the rails to detach from the sliding mechanism. In particular, it’s important to not over-pack your top tube bag. Features - Waterproof slider and welded seams ensure contents stay dry - One-finger zipper puller ensures convenient and easy access on the go - Protected battery cable port - Lightweight waterproof laminate, developed specifically for Apidura - Reflective exterior graphics for increased visibility Materials - The Expedition Top Tube Pack is cut from a three-layer laminate fabric that was developed specifically for Apidura. The material is lightweight, and is highly resistant to tears and abrasion. Notably, it’s welded together at the seams, creating a watertight seal that ensures the top tube bag remains completely waterproofing. Care - Wash the top tube bag by hand, using a mild diluted soap if necessary. Afterwards, let it air dry. - Do not machine wash, machine dry, or iron. - Excess strain can cause the rails to detach from the sliding mechanism. Do not over-pack.

The Racing Saddle Pack is the first rear pack dedicated to ultra-distance competition and audax. Featuring a sleek design with a compact capacity, the Pack is ideal for storing light, compressible items over vast distances. Constructed from an ultralight, waterproof laminate developed for Apidura. The Pack weighs less than 210g and securely fastens with a sturdy three-point attachment system. It’s designed to fit ergonomically under the saddle, minimizing sway and reducing drag. Light attachment points are laser-cut into the fabric, increasing rider safety without adding unnecessary weight. A high-contrast reflective feature is specially designed to enhance visibility in all light conditions. A roll-top closure provides adjustable capacity, and tailored webbing, straps and buckles shed extra weight, while ensuring the simplest setup for ease of use, when every second matters. Materials The Racing Saddle Pack is made from Hexalon, a bespoke laminated fabric developed specifically for Apidura. Designed to fit the demands of ultra-distance competition and audax, the material is waterproof and lightweight, with strong tear and abrasion resistance. The attachment points are reinforced with Hypalon, a durable rubberized nylon that provides extra protection against friction and puncture. For the fastening system, we’ve chosen Woojin buckles for strength and reliability.

Zipp's Speed Box 1.0 is designed to mount securely to a bike's top tube to hold nutrition and small items conveniently within reach. Featuring solid-molded EVA construction, water-resistant zippers, and 3-point Velcro attachments, the Speed Box 1.0 is a lightweight, easy-to-use alternative to traditional saddle bags.

Zipp's Speed Box 2.0 is designed to mount securely to a bike's top tube to hold nutrition and small items conveniently within reach. Featuring solid-molded EVA construction, water-resistant zippers, and 3-point Velcro attachments, the Speed Box 2.0 is a lightweight, easy-to-use alternative to traditional saddle bags.

Zipp's Speed Box 3.0 is designed to mount securely to a bike's top tube to hold nutrition and small items conveniently within reach. Featuring solid-molded EVA construction, water-resistant zippers, and 3-point Velcro attachment, the Speed Box 3.0 is a lightweight, easy-to-use alternative to traditional saddle bags.

When race day arrives, the last thing you want to worry about is organization. The Zipp Transition 1 Gear Bag has multiple compartments to keep your essentials easy to find and converts quickly from backpack to duffel with a removable shoulder strap. A top molded pocket protects valuable items like cell phones and sunglasses, while a large ventilated lower compartment keeps shoes or wet clothes separated from the main hold. Camera bag-style dividers, an adjustable helmet pocket, and water-resistant fabric further extend the Transition 1's versatility, providing race-day relief from basic, cluttered alternatives. - Center compartment includes camera bag-style dividers to keep items organized. - Large ventilated lower compartment for shoes or wet clothing. - Adjustable helmet pocket. - EVA top pocket. - Side net for water bottles. - Reflective tabs. - Total volume of 56 liters

Keep small items separate for easy access. With a quick twist, the store-all Duo Pod opens up two waterproof compartments, each ideally sized for keeping both large and small items neatly organized. - Fits in cage - Two waterproof compartments to easily sort items by size. No more mixing nutrition with money or jersey pocket baggies. - Large Chamber: 600mL (20.3 fl oz) fit for repair essentials like a tube, two tire levers, XLAB AirStrike CO2 Cartridges, inflator, tool kit and patch kit. - Small Chamber 83mL (2.8 fl oz): Tucks away smaller items like cash, house keys or salt tablets - Includes rattle-proof microfleece bag to block noise - Deep notch keeps pod secure in cage - Capacity: Upper Compartment Capacity 83mL (2.8 fl oz), Large Chamber 600mL (20.3 fl oz) - Ideal Contents: Cash, House Keys, Salt Tablets, Patch Kit, XLAB Inflator - Lower Compartment Capacity: 600mL (20.3 fl oz) - Ideal Contents: Tube, (2) Tire Levers, 2 XLAB AirStrike CO2 , XLAB Inflator, XLAB Tri Tool Kit, Patch Kit - Weight: 106g (including bag) - Height: 197mm tall - Includes: Pod Container and MIcrofleece Bag - Warranty: 2 Year Limited Warranty

Convenient, state-of-the-art storage case with a stealth carbon-look finish fits securely in cages. Rattle-proof padding for a noiseless ride. Ideal for road-side repair tools. - Capacity: 25.8 cubic inches (423 cubic cm) - Height: 5.25 in (133.5 mm) - Weight: 65g

Xlab's Mezzo Bag is the perfect seat bag for carrying and protecting your spare tubular tire (or 2 tubes), your inflator, and other essential repair items. The bag features a large main compartment and a zip pocket on the outside for easy access. It's made from tough woven nylon. It's easy to install with the hook-and-loop and buckled straps, and it works with both standard and aero seatposts.

Xlab's Mini Bag is a small seat bag perfect for carrying the essentials. Can fit a tube, tire levers, inflator, patch kit, and two 16-gram CO2 cartridges. Small enough to tuck under your saddle or inside your Super Wing or Carbon Wing rear carrier. It's made from tough Cordura, is easily attached with the hook-and-loop straps, and it works with round and aero seatposts.

Square top-tube boxes are not aero, so step in the Rocket Pocket! The streamlined design of the Rocket Pocket eliminates stem drag. The non-slip surface underneath provides sturdy nutrition storage. An easy-slide rubber zipper pull allows for a quick, easy open and close to keep your focus on the road. Silver interior lets you find your nutrition or salt tablets quickly. It can fit the longest energy bars

Square top-tube boxes are not aero, so step in the Rocket Pocket! The streamlined design of the Rocket Pocket XL eliminates stem drag. The non-slip surface underneath provides sturdy nutrition storage. An easy-slide rubber zipper pull allows for a quick, easy open and close to keep your focus on the road. The silver interior lets you find your nutrition or salt tablets quickly. It can fit the longest energy bars.

Airfoil Shape bag large enough to fit phones up to 6.75" (172mm) diagonally. Includes inside pocket for small items. Has extra long front strap, ideal for standard stems. 3.3" high, 46 cu.ins (750cc) capacity. Includes hang tag to promote cell phone usage! Structured, strap mounted bag for standard stems fits cell phones up to 6 3/4" (171.45mm) diagonally and 6-8 gels. - Upgrade to a new, higher capacity top tube bag perfect for handling larger cell phones - Comfortably fits 6-8 gels along with cell phone, or 10 gels without a phone - Keep tablets or used gel wrappers separate in a handy inside pocket - Rubberized bottom keeps the bag in place - Avoid an overheated smartphone on those hot sunny days - bag interior is insulated! - Highly visible, silver colored interior makes it easy to see contents and stay focused on the road Keep Focused on the Road: Smarter Features for Easy-Access Storage - Wide access opening to easily remove and handle cell phone - Inside pocket for tablets, cash or sticky used gel wrappers - Large, easy-pull zipper for ease of access even when race day adrenaline is at its peak - Silver colored interior makes it easy to find contents - One-handed Super-Slide zipper Aerodynamic Design Tucks Right In Behind Stem - Structured shape perfectly optimized to tuck in behind stem and headset spacers without increasing frontal area - Extra long straps ensure security on all styles of bike configurations Contents Stay Cooler - Insulated sides keep your nutrition cooler

The Stealth Pocket 100 is the first in a line of next-generation top-tube bags. It has a 72-degree front that fits tight up against the stem and features an inside mesh pocket for electrolyte/salt tablets. The bag reduces drag caused by the stem and headset spacers (note: measure stem height to height of bag). The silver-colored interior makes it easy to see what’s inside quickly so you can turn your focus back to the road ahead. With a non-slip surface underneath and extra-long front straps, you won’t have trouble attaching it even if you have cables entering your frame behind the headset. And, you’ll be sure that the Stealth Pocket 100 will stay in place so you can get to your nutrition quickly and easily.

Ultra durable outer showcases a ‘carbon-look’, stylish matte finish. Modern material deflects the elements maintaining high resistance to wear, perspiration and electrolyte drinks. The silver-colored interior makes it easy to see what’s inside quickly so you can turn your focus back to the road ahead. Mounts to top tube via stem/top tube straps. - Capacity: 20.4 in3 (334 cm3) - Weight: 2.3 oz (66g)