Dual-sensing Pedal-based Power Meter Ride stronger, smarter, connected with the Vector 3 pedal-based power meter. As you strive to beat your personal best on your next race or Gran Fondo, power is the most reliable way to gauge your performance on any given day, at any given time. Unlike other power meters, Vector 3 has the sensors housed right in the pedals, so it delivers reliable, accurate data on every training session. - Installs like any other pedal and quickly transfers between bikes - Measures total power, left/right balance, cadence and cycling dynamics - Sleek design provides greater cornering clearance and improved stack height - Fully integrates with Garmin cycling ecosystem for data analysis - Allows for easy updates via compatible Edge cycling computers, ANT+ connectivity or Bluetooth-enabled fitness devices and Garmin Connect Mobile app - Battery life: up to 120 hours - Cleat hardware included WARNING: The maximum weight limit of the cyclist using the Vector system is 231 lbs (105 kg). Cyclists over this weight limit risk personal injury and property damage. Specifications: - Battery type: LR44/SR44 (x4) - Battery life: up to 120 hours - Weight: 316 g - Max. rider weight: 105 kg - Accuracy: +/- 1.0% - Cleat type: Keo - Q-factor: 53 mm/55 mm with supplied spacing washer - Stack height: 12.2 mm - Field calibration - Adjustable release tension - Garmin Connect - Measurement location: Spindle - Communication: ANT+ and Bluetooth
Single-sensing Pedal-based Power Meter Ride stronger, smarter, connected with the Vector 3S pedal-based power meter. As you strive to beat your personal best on your next race or Gran Fondo, power is the most reliable way to gauge your performance on any given day, at any given time. Unlike other power meters, Vector 3S has a sensor housed in the left pedal, so it delivers reliable, accurate data on every training session. - Installs like any other pedal and quickly transfers between bikes - Reports cadence and total power (watts) - Easily upgrades to dual-sensing system - Fully integrates with Garmin cycling ecosystem for data analysis - Allows for easy updates via compatible Edge cycling computers, ANT+ connectivity or Bluetooth-enabled fitness devices and Garmin Connect Mobile app - Battery life: up to 120 hours - Cleat hardware included WARNING: The maximum weight limit of the cyclist using the Vector system is 231 lbs (105 kg). Cyclists over this weight limit risk personal injury and property damage. Specifications: - Battery type: LR44/SR44 (x2) - Battery life: up to 120 hours - Weight: 324 g - Max. rider weight: 105 kg - Accuracy: +/- 1.0% - Cleat type: Keo - Q-factor: 53 mm/ 55mm with supplied spacing washer - Stack height: 12.2 mm - Field calibration - Adjustable release tension - Garmin Connect - Measurement location: Spindle - Communication: ANT+ and Bluetooth
The XPro 15 is the ultimate expression in pedal technology. Created for competitive cyclists and triathletes seeking a competitive edge, the XPro 15 features CeramicSpeed watt-saving bearings, a hollow titanium axle and a super light carbon body giving you a pedal that weighs 88 grams per pedal. ICLIC, with its pre-opened engagement system, makes it super easy to clip in. The low stack height and oversized pedal platform make pedaling more efficient and comfortable.
Upgrade your Vector 3S to a dual-sensing power meter, and step beyond watts to see exactly how your pedaling style generates the force that moves you. When paired with Vector 3S, the upgrade pedal completes the Vector power meter system, providing left/right balance data and cycling dynamics. With the new podless design, it installs like any other bike pedal. Revolutionary cycling dynamics show you exactly where you’re generating power throughout the pedal stroke. See where you apply force on the pedal to ensure proper cleat position. The upgrade pedal also tracks when and how long you were seated versus standing so you can gauge position effectiveness.
Crank Brothers' Candy 11 is the pedal to sate a racer's sweet tooth. This customizable pedal boasts integrated traction pad technology to refine fit, feel and power transfer, while titanium components shave weight. A ribbed body helps your foot grab the pedal body when you've unclipped, though the four-sided entry will have you engaged and off on the first try. Rely on chamfered edges to reduce rock-strikes, and a hex alloy end cap bash guard to help minimize damage to the pedal body.
Crank Brothers' Eggbeater pedals are 4-sided, making them super easy to enter and exit. Their open design makes them shed mud and debris quickly, and they feature 6-degrees of knee-friendly float. The Eggbeater 11s boast titanium axles, wings, and bodies, stainless-steel springs, and inner needle bearings. Crank Brothers has also made the Eggbeater internals water-tight for excellent durability and consistently smooth pedaling.
The clipless track pedal is finally here. The era of straps, a far cry from what the ever-evolving science of aerodynamics suggests, is over. The KEO BLADE CARBON CERAMIC Track Edition brings the numerous advantages and especially the carbon blade that have already proven their worth on the road, to the wooden boards of the velodrome. The pedal offers the reassuring feeling of security of a strap thanks to a control roller that adjusts pedal opening, and also triggers the release of the foot in the event of a fall. - Technology: Blade - Cleats: Keo Cleat - Tension: Serial installed in 16 with Track Manual Locker - Body: Carbon - Blade: Carbon - Spindle: Chromoly+ - Bearings: Ceramic - Platform area: 700mm² - Platform width: 67mm - Q Factor: 53mm - Stack height + cleats: 14.8mm (8.5 + 6.3mm) - Weight (pedal): 121g - Weight (pair + cleats): 310g
Speciale is the ultimate balance between aesthetics and performance. Developed by Time's engineers for the demands of the sport, this enduro pedal is made of a 6106-T6 aluminum body which is 20% more durable than other grades of aluminum. It features a wide platform, adjustable pins for optimal grip, and a micro-adjustable clamping system to meet the demands of the most advanced riders. The proven ATAC engagement system (TIME patent) allows easy clip in and positive, predictable release as well as a design that self-cleans even in the most difficult conditions. Like all Time pedals, the Speciale is 100% made in France at their factory in Nevers, exceeding high material and production standards.
Ride with rage without compromising safety. This is what best defines the X-TRACK EN-RAGE, our top-of-the-line enduro pedal. The PLUS Ti model features a titanium axle for added strength and improved stiffness all while shaving grams. The wide, forged aluminum body on all PLUS models will increase stability and support across the most challenging terrain. - Technology: X-Track - Cleats: X-Track Cleat included (Easy Cleat available separately) - Cleats standard: SPD compatible - Retention: 6 to 14 - Body: Forged Aluminum - Spindle: Titanium - Platform area: 664mm² - Platform width: 67mm - Stack height + cleats: 16.8mm (10.7 + 6.1mm) - Weight (pedal): 200g - Weight (pair + cleats): 450g - Float angle: 6° - Release angle: 13°
The ceramic bearing and famous BLADE technology transfers 100% of your power input to the drivetrain, making the KEO BLADE CARBON CERAMIC pedals a great choice. With the wide, 700mm² contact area, your foot will become one with the pedal, as you become one with your bike. - Technology: Blade - Cleats: Keo Cleat - Retention: Serial installed in 12 + additional 16 in box, 20 sold separately - Body: Carbon - Blade: Carbon - Spindle: Chromoly+ - Bearings: Ceramic - Platform area: 700m² - Platform width: 57mm - Q Factor: 53mm - Stack height + cleats: 14.8mm (8.5mm + 6.3mm) - Weight (pedal): 110g - Weight: (pair + cleats): 290g
$214.00 - $224.00
Speedplay's Zero Stainless are superb pedals for road cycling thanks to their light weight, cornering clearance, adjustability and easy entry and exit. This means you'll be the first going out of stop signs and start lines and be able to dive into the deepest corners. The Zeros let you choose a fixed cleat position or up to 15-degrees of unimpeded float, and independently adjust the lateral and fore/aft positioning. Plus, these pedals are exceptionally light, making them a great choice for your prized road rocket. They boast needle and cartridge bearings for smooth rotation and a cleat-based engagement mechanism that ensures you won’t clip out when going hard. - Fits all standard 3-Hole and 4-Hole shoes - Thin, contoured cleat profile makes walking easier and more fluid
Shimano Ultegra R8000 pedals. - Pro-level performance and lightweight for the enthusiast - The legacy of Shimano design, quality and performance - Carbon-composite body - Extra-wide platform for a more efficient transfer of power - Adjustable entry and release tension settings - 4mm longer axle available - Low stack height - 0.7mm lower than PD-6800 - Model Number: PD-R8000 - Series: Ultegra - Pedal System: SPD-SL - Average Weight: 248 grams
The XPro 10 is perfect for high performance riders. With a carbon body and hollow steel axle the XPro 10 is light and durable at the same time. The ICLIC system is pre-opened making clipping in super easy. The XPro 10 features carbon blade tension adjustment, a low stack height and an oversized pedal platform for pedaling efficiency and comfort.
Xpedo's designers went back to the drawing board for the GFX to create a fresh new design to meet the demands of the evolving downhill racing styles. The latitude entry system allows rapid engagement in any condition, positioning the front claw upwards for intuitive, seamless contact with the pedal. The Posi-Fit retention system is fully adjustable for fine-tuning the entry and release. The low-profile 6061 CNC body with adjustable height pins provide traction and support with any style of shoes. Tapered cromoly spindles roll on three precision cartridge bearings for easy maintenance. Wider Q-factor allows ample clearance between shoe and crankarm. - Weight: 468g CrMo - Body: 60661 CNC AL - Spindle: Cromoly - Bearings: 3 Cartridge - Springs: SWP - Pins: 16 adjustable height grub pins per pair - Cleat: XPEDO XPT (6° Float)
Riding in deep, sticky snow just got a whole lot easier. 45NRTH's Helva pedals feature an open CNC-forged body that excels at shedding snow. Its super thin 9mm profile gives you maximum clearance while cornering and riding in deep ruts, plus they're light. Sealed DU bearings keep them spinning smooth and replacement pin kits are available (sold separately) in seven different colors so you can color-coordinate your rig. - Size: 110mm wide x 100mm long x 9mm high - Spindle diameter: 9/16-inch - Weight: 308 grams
$144.00 - $154.00
Speedplay's Zero Chromolys are fantastic pedals for road cycling thanks to their low weight, cornering clearance, adjustability and easy dual-sided entry and exit. This means you'll be the first going out of stop signs and start lines and be able to dive into the deepest corners. The Zeros let you choose a fixed cleat position or up to 15-degrees of unimpeded float, or independently adjust the lateral and fore/aft positioning. They boast needle and cartridge bearings and a cleat-based engagement mechanism that ensures you won’t clip out when going hard. - Dual sized, self-locating entry is easy and precise, every time - Large, stable pedaling platform - Fits any shoe with a 3 or 4-hole mount
Foot, meet pedal. Thanks to the Stamp, you two will be closely acquainted. After scrutinizing data from the outsoles of top mountain bike shoe brands, Crank Brothers discovered that two distinct surface areas can optimize the shoe/pedal bond through the whole range of shoe sizes. The result is the Stamp, a pedal with minimum profile and maximum concavity. Specifications: - spindle material: forged scm 435 chromoly steel - body material: forged 6061-T6 - inner bearing type: igus LL-glide bearing - outer bearing type: igus LL-glide bearing - footprint: 100mm x 100mm (small) / 114mm x 111mm (large) - adjustable pins: 10 per side - minimal profile: 11mm-13mm thin - stamp small recommended for shoe sizes: 5-10 (us) // 37-43 (eu) - stamp large recommended for shoe sizes: 10-15 (us) // 43-49 (eu) - weight: 375g per pair (small) / 405g per pair (large)
Speciale 8 is Time's enduro pedal directly inspired by the renowned Sepciale 12. This enduro pedal is composed of an aluminum body that's slightly more compact than its big sister. You'll appreciate its stable platform with 4 adjustable spikes for optimal grip even unclipped and the micro-adjustable clamping system that meets the demands of the most advanced bikers. The patented ATAC engagement system (TIME patent) allows for easy insertion and positive, predictable release, as well as self-cleaning design, even in the toughest conditions. The Speciale 8 is entirely assembled in France in Time's Nevers factory, thus exceeding the highest standards in terms of materials and production.
PD-R7000 NEW FEATURE - Carbon fiber reinforced resin pedal body - Wide contact area - 265g/pr (25g/pr lighter than PD-5800) BENEFIT - Optimum power transfer - Lightweight - Aerodynamic image - Color: CFRP - Average weight: 265 g - Road clearance: 31° - Binding: Single Sided - Cleat included: SM-SH11 - Optional cleat: SM-SH10 / SM-SH12 - Pedal Type: Road - Reflector: SM-PD65
e*thirteen's Plus pedal features a lightweight aluminum pedal body and 22 traction pins. - Lightweight aluminum pedal body - 22 traction pins - 9/16"
Crank Brothers' Candy 3 pedals combine 4-sided cages for super-easy entry/exit with CNC'd aluminum platforms for low weight, great foot stability, and on-trail durability. The Candy 3s feature chromoly axles, stainless steel springs, CNC machined aluminum wings, and an open design that sheds mud fast, making them ideal for sloppy conditions and cyclocross. They're also enhanced with inner needle bearings and water-tight internals for consistently smooth pedaling.
$130.00 - $135.00
Minimal & lightweight for xc/trail riding. 4-sided entry enables superior mud shedding, and customizable float and release angles create a dialed-in feel. Specs: Spindle material: Forged SCM 435 chromoly steel Body material: Cast stainless steel Wing material: 17-4PH stainless Spring material: 300 series stainless steel Release angle: 15° / 20° Q-factor: 52mm Inner bearing type: Igus LL-glide bearing Outer bearing type: Enduro cartridge bearing Cleat: Premium brass cleats with shims included Weight: 280g per pair Warranty: 5 years
Crank Brothers' Mallet 3 pedals sport the company's super easy-to-enter/exit 4-sided cages with wide aluminum/polycarbonate platforms for stellar support and stability, as well as tough chromoly axles with steel wings for durability, making these great pedals ideal for downhill riding and free riding. The open design quickly sheds mud for reliability in sloppy conditions and the traction pins grip well when you're riding clipped out between corners.
Enduro riding is rough on all bike components, and pedals are often the first in the line of fire. The X-TRACK EN-RAGE PLUS pedal features a forged aluminum body for incredible strength. The pedals are SPD compatible and will confidence on the roughest trails thanks to a 13° disengagement angle. - Technology: X-Track - Cleats: X-Track Cleat included (Easy Cleat available separately) - Cleats standard: SPD compatible - Retention: 6 to 14 - Body: Forged Aluminum - Spindle: Chromoly+ - Platform area: 664mm² - Platform width: 67mm - Stack height + cleats: 16.8mm (10.7 + 6.1mm) - Weight (pedal): 225g - Weight (pair + cleats): 500g - Float angle: 6° - Release angle: 13°
The ATAC XC 8 is the pedal preferred by competitive cyclocross, mountain bike riders, and gravel road riders. It features the lightness of a carbon body and the durability of a chromed, hollow oversized steel axle. The exclusive ATAC system (TIME patent) offers very easy engagement and its open design automatically clears debris each time you step in. The ATAC XC 8 is also a great choice for trail riding or bike touring.
$125.00 - $130.00
iSSi's Trail Pedals offer bold styling, reliable technology, and a wide platform for better contact while in and out of the pedal. The Trail platform disperses pressure on your foot and provides a little extra confidence when descending unclipped. Dual-sided entry makes these SPD-compatible pedals simple to get into, while easily adjustable entry/release tension is perfect for beginners and experts alike. With triple-sealed cartridge bearings and durable chromoly spindles, these pedals will spin smoothly for countless rides. Plus, four degrees of float helps your knees track naturally during every crank revolution.
Crank Brothers' game-changing hybrid pedal is now available in a trail-ready version designed for more aggressive riding styles. Details - Hybrid pedal half flat / half clip-in - 8 adjustable traction pins and textured finish for grip - Wide 57mm q-factor for stability at speed - Diamond plate pads for traction - 2-sided entry / superior mud shedding - Premium bearings & double seal system Specs - Adjustable pins: 8 per side - Body material: A380 aluminum - Cleats: Premium brass cleats with shims included - Inner bearing type: Igus LL-glide bearing - Max rider weight: No restriction - Outer bearing type: Enduro cartridge bearing - Q-factor: 57mm - Release angle: 15° / 20° - Spindle material: Forged scm 435 chromoly steel - Spring material: 300 series stainless steel - Warranty: 5 years - Weight: 403g per pair - Wing material: Cast stainless steel
The Xpresso 7 features carbon blade tension adjustment, a low stack height, and an oversized pedal platform for pedaling efficiency and comfort. This is the perfect pedal for criteriums, gran fondos, and everything in between. It is the only pedal in the Xpresso line to use a carbon body, and it also features a hollow steel axle that's both light and durable. The ICLIC system is pre-opened which makes clipping in super easy.
The original game changer! SPANK Industries' SPIKE Pedals changed the world's concept of the benefits a flat pedal can offer and set the benchmark for top of the line value. The SPIKE Pedal's svelte 12mm thin forged alloy body not only maximizes pedaling clearance, but also grip and stability, by placing the rider's foot closer to the pedal axle. Equipped with forged hollow-tapered chromoly steel axles, SPIKE Pedals offer unmatched ultimate strength at just 420g per set. 20 steel pins in a virtual concavity configuration offer supreme grip without compromising platform thickness. Oversized industrial sealed bearings and IGUS bushings guarantee exceptional durability and performance. Often imitated, the SPIKE's CNC chamfered leading edges deflect impact forces and bring and instantly recognizable edgy aesthetic that always turns heads. - 12mm thin - Massive 100x100mm platform - ±420g/set (with full pin complement) - Cold forged, CNC optimized alloy pedal body - Cold forged chromoly steel axle - Chamfered leading edges for improved clearance and reduced impact forces - Chamfered side edges for improved cornering clearance - Oversized sealed full compliment inboard industrial bearing - Sealed outboard IGUS bushing - 20 adjustable pins per pedal - Full sized hex head pins improve durability and maintenance - Inboard friction seal prevents contamination and reduces unwanted pedal spin
$105.00 - $110.00
The Flash is iSSi's minimalist take on the traditional two-sided clipless pedal. It performs as well on the trail as it does on the commute. Three sealed cartridge bearings make the Flash III iSSi’s smoothest rolling, most durable, lightest clipless pedals with multiple spindle length options. - Spindle Type: Flip III: Triple Bearing - Smooth-rolling at an affordable pricepoint - SPD-compatible cleats and mounting hardware included
Page 1 of 5 Next page