Road

The R5 is legendary. From the limits-shattering R5CA to Wout van Aert’s winning day on Mont Ventoux, R5 has been part of Cervelo’s story for over two decades. This all-new R5 is an incredibly light (5.97kg in RED and Dura-Ace builds) road bike that’s also stiff enough to compete at the highest levels of professional cycling—as Pauline Ferrand-Prevot proved when she rode it to victory at this summer’s Tour de France Femmes. It’s easy enough to make a light bike, but to make a light bike that’s stiff enough to accelerate quickly and transfer power from the sport’s biggest motors? That’s another challenge entirely. R5 is the bike for big days in the high mountains of the Tour de France, and the punishingly steep climbs of the Vuelta a Espana. Bikes built for the mountains must not only accelerate rapidly and climb exceptionally, but descend confidently and predictably. While the UCI mandates a minimum weight of 6.8kg, those of us in the ‘mere mortal’ category will benefit from having the lightest road bike on the market.

The R5 is legendary. From the limits-shattering R5CA to Wout van Aert’s winning day on Mont Ventoux, R5 has been part of Cervelo’s story for over two decades. This all-new R5 is an incredibly light (5.97kg in RED and Dura-Ace builds) road bike that’s also stiff enough to compete at the highest levels of professional cycling—as Pauline Ferrand-Prevot proved when she rode it to victory at this summer’s Tour de France Femmes. It’s easy enough to make a light bike, but to make a light bike that’s stiff enough to accelerate quickly and transfer power from the sport’s biggest motors? That’s another challenge entirely. R5 is the bike for big days in the high mountains of the Tour de France, and the punishingly steep climbs of the Vuelta a Espana. Bikes built for the mountains must not only accelerate rapidly and climb exceptionally, but descend confidently and predictably. While the UCI mandates a minimum weight of 6.8kg, those of us in the ‘mere mortal’ category will benefit from having the lightest road bike on the market.

The S5 is a sport-wide benchmark for speed and aerodynamic efficiency—with the race results to back it up. From Wout van Aert winning the Green Jersey by the biggest margin of victory in modern history, to Simon Yates riding himself into the maglia rosa, S5’s iconic V-stem and bayonet fork are a fixture at the front of the professional peloton. The new S5 builds on that legacy of speed by getting even faster. The new bike is over 6 Watts faster than its predecessor, 124 grams lighter, and retains the handling, poise, and stability that riders everywhere love. The biggest changes are at the front of the bike, where the most significant aerodynamic performance comes from. The fork legs and head tube got quite a bit deeper, and the all-new, one-piece handlebar/stem builds on the original V-stem concept—and gets even faster. Cervélo and Reserve co-developed the new Reserve 57|64 Turbulent Aero wheels specifically for use in the S5 frame, completing the aerodynamic system. Aero Aero Aero The new S5 is 6.3 Watts faster than its predecessor. These gains are realized primarily at the front end of the bike, but the integration of the asymmetric profiles of the seat tube and rear wheel are a significant source as well. Cervélo has long been the aerodynamic leader in the peloton, and we’re confident that the new S5 is at least 5 Watts faster than the bikes of our competitors. One-Piece Handlebar/Stem HB19 uses our “Plus-Four” concept, meaning the dimension at the hoods is 4cm narrower than in the drops (e.g. 38cm/42cm). This approach helps riders maintain a more aero body position while their hands are on the hoods, and provides stability in the drops for descending and sprinting. All bar sizes are UCI-legal, even in light of the most recent regulations change. Not just faster. Lighter, too. Despite an increase in surface area, the new S5 is 124 grams lighter than its predecessor. While the increase in fork and head tube depth added weight, we optimized the layup and hardware to make the system lighter. Reserve 57|64 Designed for S5: The new Reserve 57|64 wheelset was co-developed by Reserve and Cervélo, and designed for use in the new S5. The rear wheel’s asymmetry matches the seat tube, ensuring air flows smoothly over both. The new wheelset is 3 Watts faster than the 52|63 wheels, and weighs the same.

The S5 is a sport-wide benchmark for speed and aerodynamic efficiency—with the race results to back it up. From Wout van Aert winning the Green Jersey by the biggest margin of victory in modern history, to Simon Yates riding himself into the maglia rosa, S5’s iconic V-stem and bayonet fork are a fixture at the front of the professional peloton. The new S5 builds on that legacy of speed by getting even faster. The new bike is over 6 Watts faster than its predecessor, 124 grams lighter, and retains the handling, poise, and stability that riders everywhere love. The biggest changes are at the front of the bike, where the most significant aerodynamic performance comes from. The fork legs and head tube got quite a bit deeper, and the all-new, one-piece handlebar/stem builds on the original V-stem concept—and gets even faster. Cervélo and Reserve co-developed the new Reserve 57|64 Turbulent Aero wheels specifically for use in the S5 frame, completing the aerodynamic system. Aero Aero Aero The new S5 is 6.3 Watts faster than its predecessor. These gains are realized primarily at the front end of the bike, but the integration of the asymmetric profiles of the seat tube and rear wheel are a significant source as well. Cervélo has long been the aerodynamic leader in the peloton, and we’re confident that the new S5 is at least 5 Watts faster than the bikes of our competitors. One-Piece Handlebar/Stem HB19 uses our “Plus-Four” concept, meaning the dimension at the hoods is 4cm narrower than in the drops (e.g. 38cm/42cm). This approach helps riders maintain a more aero body position while their hands are on the hoods, and provides stability in the drops for descending and sprinting. All bar sizes are UCI-legal, even in light of the most recent regulations change. Not just faster. Lighter, too. Despite an increase in surface area, the new S5 is 124 grams lighter than its predecessor. While the increase in fork and head tube depth added weight, we optimized the layup and hardware to make the system lighter. Reserve 57|64 Designed for S5: The new Reserve 57|64 wheelset was co-developed by Reserve and Cervélo, and designed for use in the new S5. The rear wheel’s asymmetry matches the seat tube, ensuring air flows smoothly over both. The new wheelset is 3 Watts faster than the 52|63 wheels, and weighs the same.

The S5 is a sport-wide benchmark for speed and aerodynamic efficiency—with the race results to back it up. From Wout van Aert winning the Green Jersey by the biggest margin of victory in modern history, to Simon Yates riding himself into the maglia rosa, S5’s iconic V-stem and bayonet fork are a fixture at the front of the professional peloton. The new S5 builds on that legacy of speed by getting even faster. The new bike is over 6 Watts faster than its predecessor, 124 grams lighter, and retains the handling, poise, and stability that riders everywhere love. The biggest changes are at the front of the bike, where the most significant aerodynamic performance comes from. The fork legs and head tube got quite a bit deeper, and the all-new, one-piece handlebar/stem builds on the original V-stem concept—and gets even faster. Cervélo and Reserve co-developed the new Reserve 57|64 Turbulent Aero wheels specifically for use in the S5 frame, completing the aerodynamic system. Aero Aero Aero The new S5 is 6.3 Watts faster than its predecessor. These gains are realized primarily at the front end of the bike, but the integration of the asymmetric profiles of the seat tube and rear wheel are a significant source as well. Cervélo has long been the aerodynamic leader in the peloton, and we’re confident that the new S5 is at least 5 Watts faster than the bikes of our competitors. One-Piece Handlebar/Stem HB19 uses our “Plus-Four” concept, meaning the dimension at the hoods is 4cm narrower than in the drops (e.g. 38cm/42cm). This approach helps riders maintain a more aero body position while their hands are on the hoods, and provides stability in the drops for descending and sprinting. All bar sizes are UCI-legal, even in light of the most recent regulations change. Not just faster. Lighter, too. Despite an increase in surface area, the new S5 is 124 grams lighter than its predecessor. While the increase in fork and head tube depth added weight, we optimized the layup and hardware to make the system lighter. Reserve 57|64 Designed for S5: The new Reserve 57|64 wheelset was co-developed by Reserve and Cervélo, and designed for use in the new S5. The rear wheel’s asymmetry matches the seat tube, ensuring air flows smoothly over both. The new wheelset is 3 Watts faster than the 52|63 wheels, and weighs the same.

The R5 is legendary. From the limits-shattering R5CA to Wout van Aert’s winning day on Mont Ventoux, R5 has been part of Cervelo’s story for over two decades. This all-new R5 is an incredibly light (5.97kg in RED and Dura-Ace builds) road bike that’s also stiff enough to compete at the highest levels of professional cycling—as Pauline Ferrand-Prevot proved when she rode it to victory at this summer’s Tour de France Femmes. It’s easy enough to make a light bike, but to make a light bike that’s stiff enough to accelerate quickly and transfer power from the sport’s biggest motors? That’s another challenge entirely. R5 is the bike for big days in the high mountains of the Tour de France, and the punishingly steep climbs of the Vuelta a Espana. Bikes built for the mountains must not only accelerate rapidly and climb exceptionally, but descend confidently and predictably. While the UCI mandates a minimum weight of 6.8kg, those of us in the ‘mere mortal’ category will benefit from having the lightest road bike on the market.

The R5 is legendary. From the limits-shattering R5CA to Wout van Aert’s winning day on Mont Ventoux, R5 has been part of Cervelo’s story for over two decades. This all-new R5 is an incredibly light (5.97kg in RED and Dura-Ace builds) road bike that’s also stiff enough to compete at the highest levels of professional cycling—as Pauline Ferrand-Prevot proved when she rode it to victory at this summer’s Tour de France Femmes. It’s easy enough to make a light bike, but to make a light bike that’s stiff enough to accelerate quickly and transfer power from the sport’s biggest motors? That’s another challenge entirely. R5 is the bike for big days in the high mountains of the Tour de France, and the punishingly steep climbs of the Vuelta a Espana. Bikes built for the mountains must not only accelerate rapidly and climb exceptionally, but descend confidently and predictably. While the UCI mandates a minimum weight of 6.8kg, those of us in the ‘mere mortal’ category will benefit from having the lightest road bike on the market.

The R5 is legendary. From the limits-shattering R5CA to Wout van Aert’s winning day on Mont Ventoux, R5 has been part of Cervelo’s story for over two decades. This all-new R5 is an incredibly light (5.97kg in RED and Dura-Ace builds) road bike that’s also stiff enough to compete at the highest levels of professional cycling—as Pauline Ferrand-Prevot proved when she rode it to victory at this summer’s Tour de France Femmes. It’s easy enough to make a light bike, but to make a light bike that’s stiff enough to accelerate quickly and transfer power from the sport’s biggest motors? That’s another challenge entirely. R5 is the bike for big days in the high mountains of the Tour de France, and the punishingly steep climbs of the Vuelta a Espana. Bikes built for the mountains must not only accelerate rapidly and climb exceptionally, but descend confidently and predictably. While the UCI mandates a minimum weight of 6.8kg, those of us in the ‘mere mortal’ category will benefit from having the lightest road bike on the market.

The S5 is a sport-wide benchmark for speed and aerodynamic efficiency—with the race results to back it up. From Wout van Aert winning the Green Jersey by the biggest margin of victory in modern history, to Simon Yates riding himself into the maglia rosa, S5’s iconic V-stem and bayonet fork are a fixture at the front of the professional peloton. The new S5 builds on that legacy of speed by getting even faster. The new bike is over 6 Watts faster than its predecessor, 124 grams lighter, and retains the handling, poise, and stability that riders everywhere love. The biggest changes are at the front of the bike, where the most significant aerodynamic performance comes from. The fork legs and head tube got quite a bit deeper, and the all-new, one-piece handlebar/stem builds on the original V-stem concept—and gets even faster. Cervélo and Reserve co-developed the new Reserve 57|64 Turbulent Aero wheels specifically for use in the S5 frame, completing the aerodynamic system. Aero Aero Aero The new S5 is 6.3 Watts faster than its predecessor. These gains are realized primarily at the front end of the bike, but the integration of the asymmetric profiles of the seat tube and rear wheel are a significant source as well. Cervélo has long been the aerodynamic leader in the peloton, and we’re confident that the new S5 is at least 5 Watts faster than the bikes of our competitors. One-Piece Handlebar/Stem HB19 uses our “Plus-Four” concept, meaning the dimension at the hoods is 4cm narrower than in the drops (e.g. 38cm/42cm). This approach helps riders maintain a more aero body position while their hands are on the hoods, and provides stability in the drops for descending and sprinting. All bar sizes are UCI-legal, even in light of the most recent regulations change. Not just faster. Lighter, too. Despite an increase in surface area, the new S5 is 124 grams lighter than its predecessor. While the increase in fork and head tube depth added weight, we optimized the layup and hardware to make the system lighter. Reserve 57|64 Designed for S5: The new Reserve 57|64 wheelset was co-developed by Reserve and Cervélo, and designed for use in the new S5. The rear wheel’s asymmetry matches the seat tube, ensuring air flows smoothly over both. The new wheelset is 3 Watts faster than the 52|63 wheels, and weighs the same.

The S5 is a sport-wide benchmark for speed and aerodynamic efficiency—with the race results to back it up. From Wout van Aert winning the Green Jersey by the biggest margin of victory in modern history, to Simon Yates riding himself into the maglia rosa, S5’s iconic V-stem and bayonet fork are a fixture at the front of the professional peloton. The new S5 builds on that legacy of speed by getting even faster. The new bike is over 6 Watts faster than its predecessor, 124 grams lighter, and retains the handling, poise, and stability that riders everywhere love. The biggest changes are at the front of the bike, where the most significant aerodynamic performance comes from. The fork legs and head tube got quite a bit deeper, and the all-new, one-piece handlebar/stem builds on the original V-stem concept—and gets even faster. Cervélo and Reserve co-developed the new Reserve 57|64 Turbulent Aero wheels specifically for use in the S5 frame, completing the aerodynamic system. Aero Aero Aero The new S5 is 6.3 Watts faster than its predecessor. These gains are realized primarily at the front end of the bike, but the integration of the asymmetric profiles of the seat tube and rear wheel are a significant source as well. Cervélo has long been the aerodynamic leader in the peloton, and we’re confident that the new S5 is at least 5 Watts faster than the bikes of our competitors. One-Piece Handlebar/Stem HB19 uses our “Plus-Four” concept, meaning the dimension at the hoods is 4cm narrower than in the drops (e.g. 38cm/42cm). This approach helps riders maintain a more aero body position while their hands are on the hoods, and provides stability in the drops for descending and sprinting. All bar sizes are UCI-legal, even in light of the most recent regulations change. Not just faster. Lighter, too. Despite an increase in surface area, the new S5 is 124 grams lighter than its predecessor. While the increase in fork and head tube depth added weight, we optimized the layup and hardware to make the system lighter. Reserve 57|64 Designed for S5: The new Reserve 57|64 wheelset was co-developed by Reserve and Cervélo, and designed for use in the new S5. The rear wheel’s asymmetry matches the seat tube, ensuring air flows smoothly over both. The new wheelset is 3 Watts faster than the 52|63 wheels, and weighs the same.

Made for extremely committed amateurs and experts who want to fly up the climbs and carve the descents.

**Call for better pricing** We took the handling geometry for the Soloist directly from R5. The R5 is beloved by pros and amateurs alike for its poise, stability, and precision when that killer climb turns into an even more killer descent. Soloist benefits from our decades of race bike geometry development, and comes out of the gate ready to go. Fork Cervélo All-Carbon, Tapered Soloist Fork Headset FSA IS2 1-1/4, 45° x 45° / 1-1/2, 36° x 45° Stem Cervélo ST36 Alloy Handlebar Cervélo HB13 Carbon, 31.8mm clamp Seatpost Cervélo SP27 Carbon Saddle Prologo Nago R4 PAS LIGHTWEIGHT TiRoX Front Derailleur SRAM Force AXS E1 Rear Derailleur SRAM Force AXS E1 Cassette SRAM Force E1, 10-33T, 12-Speed Chain SRAM Force E1 Crankset SRAM Force AXS E1, 48/35T, DUB, with power meter Tires Vittoria Corsa N.EXT TLR G2.0 700x29c Max Tire Width (Actual) 34mm Accessories Cervélo Front Computer/Accessory Mount 810 Cervélo Rear Accessory Mount Front Wheel Reserve 42TA, DT Swiss 350, 12x100mm, 24H, centerlock, tubeless compatible Rear Wheel Reserve 49TA, DT Swiss 350, 12x142mm, XDR freehub, 24H, centerlock, tubeless compatible Shifter/Brake Levers SRAM Force AXS E1 * Subject to change without notice.

Rouvida gets you to fast, well, faster. Sleekly designed around the Fazua Ride60 motor, Rouvida delivers 60nM of torque paired to a 430wH battery, and assists you all the way up to 28mph Fork Cervélo All-Carbon, Tapered Rouvida Fork Headset FSA IS2 1-1/4, 45° x 45° / 1-1/2, 36° x 45° Stem Cervélo ST31 Carbon Handlebar Cervélo HB13 Carbon, 31.8mm clamp Seatpost Cervélo SP19 Carbon 27.2 Saddle Cervelo Saddle Rear Derailleur SRAM Rival XPLR AXS E1 Cassette SRAM Rival XPLR E1, 10-46T, 13-Speed Chain SRAM Rival E1 Crankset FSA CK-703 Alloy for Fazua Ride 60 Tires Vittoria Corsa N.EXT TLR G2.0 700x30c Max Tire Width (Actual) 44mm Accessories Cervélo Front Computer/Accessory Mount 810 Cervélo Rear Accessory Mount Front Wheel Vision Team i23 Disc, 23mm IW, direct pull, 12x100mm, centerlock, tubeless compatible Rear Wheel Vision Team i23 Disc, 23mm IW, direct pull, 12x142mm, XDR freehub, centerlock, tubeless compatible Shifter/Brake Levers SRAM Rival AXS E1 Spider FSA Fazua Ride 60 - SRAM 107mm BCD, 4-Bolt, Asymmetric, 47.5mm Chainline eBike Unit Fazua Ride 60 - 60 Nm torque, 450 W max / 250 W continuous power eBike Battery Fazua Ride 60 Energy 430 Fixed Mount e-Bike Classification Class 3, 28mph max speed

The Soloist. It’s a name from deep in our history, but immediately familiar to anyone with bike racing memories extending back to the early-2000s. It was the weapon of choice for top World Tour contenders on CSC and the Cervelo Test Team, and we’re bringing it back for a new generation. The new Soloist is designed for the week-in, week-out rider and racer who can only justify one high-performance bike. It balances light weight and aerodynamic advantages to deliver a bike that really is 'just right'. Soloist comes in a hair lighter than S5, but significantly more aerodynamic than R5, and borrows the threaded bottom bracket standard you find on the R5-CX. It’s a race bike that can accommodate mechanical and electronic shifting, can hammer out the training miles in all weather, and yet still has the chops to leap off the front at that decisive moment. That’s the Soloist. Fork Cervélo All-Carbon, Tapered Soloist Fork Headset FSA IS2 1-1/4, 45° x 45° / 1-1/2, 36° x 45° Stem Cervélo ST36 Alloy Handlebar Cervélo HB13 Carbon, 31.8mm clamp Seatpost Cervélo SP27 Carbon Saddle Prologo Nago R4 PAS Tirox Lightweight Front Derailleur Shimano Ultegra, R8150 Rear Derailleur Shimano Ultegra, R8150 Cassette Shimano Ultegra, R8100, 11-34T, 12-Speed Chain Shimano M8100 Crankset Shimano Ultegra, R8100, 52/36T Bottom Bracket FSA, T47 BBright for 24mm spindle Tires Vittoria Corsa N.EXT TLR G2.0 700x29c Max Tire Width (Actual) 34mm Accessories Cervélo Front Computer/Accessory Mount 810 Cervélo Rear Accessory Mount Front Wheel Reserve 42TA, DT Swiss 350, 12x100mm, 24H, centerlock, tubeless compatible Rear Wheel Reserve 49TA, DT Swiss 350, 12x142mm, HG freehub 24H, centerlock, tubeless compatible Shifter/Brake Levers Shimano Ultegra, R8170 Power Meter 4iiii Precision Pro, GEN3+ Dual Sided

Warbird is Salsa's gravel race bike, built on years of experience racing in some of the nation’s premier gravel events. Its carbon fiber frameset, our carefully-honed gravel race geometry, and plentiful mounts for water, tools, and accessories make Warbird a top contender in the gravel bike world. - High-modulus carbon frame with rear thru-axle dropouts and rear rack compatibility via the Salsa Rack-Lock seat collar (sold separately) - Class 5™ Vibration Reduction System (VRS) reduces fatigue caused by micro-impacts - Waxwing Deluxe V2 carbon fork features a 12 x 100mm thru-axle, Three-Pack and fender mounts, mid-blade eyelets, and flat-mount brake standard - Compatible with 700c (45mm maximum) and 650b (51mm maximum) wheels and tires - Compatible with 1x, 2x, and electronic drivetrains - Internal sleeved cable and brake routing; internal dropper post routing with 1x drivetrains - Three water bottle mounts in the main triangle on 56–61cm frames; two on 49–54.5cm frames - Top tube mount for Salsa EXP-R Series Trillium Top Tube Bag and additional mount on underside of down tube - Accommodates a 40mm travel suspension fork

Oltre Zero is designed for expert riders with the need for speed and the simplicity of the open road. RIDING CONDITIONS Riding on paved roads. FRAMESET FRAME Carbon FORK Full Carbon aero, disc brakes integrated head HEADSET Fsa ACB 1.5" 51.8x40x8 DRIVETRAIN SHIFTERS Shimano Ultegra Di2 hydraulic disc brake for road REAR DERAILLEUR Shimano Ultegra Di2 12sp, RD-R8150, top normal shadow design, direct attachment, W/TL-EW300, 34T Max Low Sprocket FRONT DERAILLEUR Shimano Ultegra Di2 12sp, FD-R8150, brazed-on type, down swing, top gear 50-54T CRANKSET Shimano Ultegra 12sp, FC-R8100, Ultegra hollowtech 2, for rear 12- speed, 170-172mm, 50x34T w/o BB parts, Crank Length: 170mm-47/54cm, 172.5mm-55/59cm BOTTOM BRACKET Shimano, press fit for road, right & left adapter, bearing, inner cover CHAIN Shimano Ultegra 12sp BRAKES Shimano BR-R8170 Hydraulic disc brake included in the shifter. ROTOR Shimano center lock type w/Ice Tech, 160mm front rear, with lock ring WHEELS Velomann V50R, 50mm profile front and rear, weight per set 1630g, ASTM 2, UD carbon fiber, tyre compatibility: tubeless ready and clincher, recommended tyre size: 700c, from 25 mm, internal width: 21 mm, rear hub compatible with FW HG / FW XDR REARHUB Aluminium alloy 6061, width: 100-142 mm, sealed cartridge bearings, Brake interface: Center Lock FRONTHUB Aluminium alloy 6061, width: 100-142 mm, sealed cartridge bearings, Brake interface: Center Lock TIRE Pirelli P7, 700 x 28c, 60TPI, Nylon breaker, Folding COCKPIT STEM Velomann Aero stem, material alloy, Oversize, 1.1/8", size: 90-47/50cm, 100-53cm, 110-55/57cm, 120mm-59cm, w/Oltre custom top cap stem cover w/magnet HANDLEBAR Velomann Aero Compact handlebar, alloy diam. 31,8mm, reach 70mm, drop 120mm, Size: 400mm-47/53cm, 420mm-55/59cm GRIPS Black soft Microfiber tapes+EVA-139 Shockproof 200*3cm with 4 line hole Black/Celeste color and VLP-56 BK plug SEATPOST Velomann Oltre Full Carbon Aero special dimension, 20mm offset, length: 280mm-47cm, 300mm-50/53cm, 350mm-55/59cm SADDLE Velomann Mitora, weight 215g, Lenght: 250mm, Wide: 139mm *Based on component availability, Bianchi reserves the right to make changes on specifications without notice.

Warbird is Salsa's gravel race bike, built on years of experience racing in some of the nation’s premier gravel events. Its carbon fiber frameset, our carefully-honed gravel race geometry, and plentiful mounts for water, tools, and accessories make Warbird a top contender in the gravel bike world. - High-modulus carbon frame with rear thru-axle dropouts and rear rack compatibility via the Salsa Rack-Lock seat collar (sold separately) - Class 5™ Vibration Reduction System (VRS) reduces fatigue caused by micro-impacts - Waxwing Deluxe V2 carbon fork features a 12 x 100mm thru-axle, Three-Pack and fender mounts, mid-blade eyelets, and flat-mount brake standard - Compatible with 700c (45mm maximum) and 650b (51mm maximum) wheels and tires - Compatible with 1x, 2x, and electronic drivetrains - Internal sleeved cable and brake routing; internal dropper post routing with 1x drivetrains - Three water bottle mounts in the main triangle on 56–61cm frames; two on 49–54.5cm frames - Top tube mount for Salsa EXP-R Series Trillium Top Tube Bag and additional mount on underside of down tube - Accommodates a 40mm travel suspension fork

Caledonia doesn't fit in a box nicely, and we like it that way. It was conceived on our Thursday night rides-routes that often play fast and loose with 'road ride.' Modern road riders are looking for bikes to handle long-distance, high pace, no limits, and offer maximum fun - the Caledonia delivers performance, comfort, and speed. Oh, and you can fit a 34mm tire in there. Or 31mm with fenders. - Removable FDM Our bolt-on front derailleur mount is made from high-strength aluminum alloy and attaches to the frame with two countersunk screws. This allows for easy replacement in the event of damage but also enables you to adapt to new standards as they become available or remove the front derailleur mount completely if you choose a 1x system. - Integrated Accessory Mounts Integrated mounts enable the use of fenders, lights, and computers without compromising the aerodynamics or structure of your bike. The built-in mount systems provide a simple and clean-looking solution.

Pre-Order Your Scylon Now The all-new TIME Scylon is almost here — crafted for precision handling, and ultimate speed. Engineered with our next-gen carbon fiber technology, this bike is designed to push limits and redefine performance. Be the first to experience the future of speed. ***See Release Schedule for availability*** A TIME Legend Reborn The Scylon is our most aerodynamic offering, a purebred racing machine based on exhaustive simulations and fluid dynamics analysis. The agony of a fast, windy breakaway cannot be reduced. Thankfully, the sprint will come a few seconds sooner aboard this weapon. A carbon layup that blends Vectran© fibers with high-strength and high-modulus carbon balances performance with the strength and damping needed for all-out efforts. Generation 2 Objectives Reduce weight by exploring new materials Improve aerodynamics via shaping and CFD analysis Advance our BCS technology to maintain similar stiffness and strength Update integration and tire clearance to meet the needs of modern riders Maintain the spirit of Scylon Generation 2 Results 100+ gram weight reduction per frame size Aerodynamic improvement of 12% Pedaling stiffness maintained Torsional stiffness improved by 9% Full cable integration - multi-brand compatible and 32c tire compatibility Fully redesigned geometry and ergonomics in the most advanced frameset that TIME has ever produced FRAME MATERIAL Gen 2 BCS M46J / T800 Carbon Fiber Layup THRU AXLES 12x120x1.5mm pitch F, 12x159x1.5mm pitch R SIZES XXS, XS, SM, MD, LG, XL SEATPOST DIAMETER Proprietary SCYLON Aero Carbon, -20/+10mm SB FORK STEERER TUBE Kevlar Enhanced BCS Carbon Fiber - Tapered 1–1/8” to 1–1/2” SEATPOST CLAMP Semi-Integrated TIME Alloy HEADSET BEARINGS FSA Headset/SRS Topcap for Semi & Fully-Integrated Cockpits SHIFTING Compatible with all Electronic Shifting Systems WHEEL SIZE 700c FRONT DERAILLEUR Standard Mount MAXIMUM TIRE WIDTH 700x32 (not all tire/rim combinations fit with adequate clearance - check for appropriate fit) REAR DERAILLEUR Standard Mount BOTTOM BRACKET PF 386 EVO BRAKE TYPE Front and Rear Flat Mount Disc DISC HUB STANDARD 12x100mm F, 12x142mm R ROTOR SIZE 140/160mm with Adapter

DESCENDED FROM GREATNESS Take one look at the all-new P-Series, and you’ll notice a striking resemblance to our flagship TT bike, the P5. P-Series benefits from all the racing, wind tunnel time, and testing required to make the P5 the fastest TT bike in the World Tour, but adds a couple features that make it a perfect companion for a triathlon of any distance. P-Series uses a fork with a D-shaped steerer tube and round stem interface. This means you can use whichever basebar and extensions you prefer, and make changes if your fit or preference changes. It’s also significantly more adaptable if you have very specific fit requirements. Increased wheel and tire clearance, reduced aerodynamic drag, neater cable routing, and Cervelo’s first internal frame storage all add up to create the bike of choice for those looking to make the most of the time between T1 and T2. FREE SPEED The new P-Series frame is 5.9 grams faster than the outgoing one, but the added tire clearance makes room for the Reserve 52/63 wheels, and 29mm Vittoria tires, which combine for a 30 grams or 3.5 watts savings vs the Reserve 50/Vittoria 28 combo. IN-FRAME STORAGE New this year on the P-Series, the in-frame storage is designed for a tube, small multi-tool, and a CO2 canister. The hatch is easily removable with or without a bottle in place—just flip the lock and pull. FUEL FOR THE RUN In addition to the all-new in-frame storage, we still ship every P-Series with the Smartpak 400, our top tube-mounted bento box, which makes fueling on the bike much simpler without sacrificing aerodynamics. FIT FOR SPEED The P-Series is all about adapting to the athlete. Maximum stack increased to 53mm, and we include spacers to bring the basebar up that high. Fitting and positions are evolving, and P-Series offers the most flexibility in an incredibly fast package.

Caledonia doesn't fit in a box nicely, and we like it that way. It was conceived on our Thursday night rides-routes that often play fast and loose with 'road ride.' Modern road riders are looking for bikes to handle long-distance, high pace, no limits, and offer maximum fun the Caledonia delivers performance, comfort, and speed. Oh, and you can fit a 34mm tire in there. Or 31mm with fenders. REMOVABLE FDM Our bolt-on front derailleur mount is made from high-strength aluminum alloy and attaches to the frame with two countersunk screws. This allows for easy replacement in the event of damage but also enables you to adapt to new standards as they become available or remove the front derailleur mount completely if you choose a 1x system. INTEGRATED ACCESSORY MOUNTS Integrated mounts enable the use of fenders, lights, and computers without compromising the aerodynamics or structure of your bike. The built-in mount systems provide a simple and clean-looking solution.

A BIKE FOR THE WAY RIDERS RIDE Caledonia doesn’t fit in a box nicely, and we like it that way. It was conceived on our Thursday night rides—routes that often play fast and loose with ‘road ride.’ Modern road riders are looking for bikes to handle long-distance, high pace, no limits, and offer maximum fun—the Caledonia delivers performance, comfort, and speed. Oh, and you can fit a 34mm tire in there. Or 31mm with fenders. REMOVABLE FDM Our bolt-on front derailleur mount is made from high-strength aluminum alloy and attaches to the frame with two countersunk screws. This allows for easy replacement in the event of damage but also enables you to adapt to new standards as they become available or remove the front derailleur mount completely if you choose a 1x system. INTEGRATED ACCESSORY MOUNTS Integrated mounts enable the use of fenders, lights, and computers without compromising the aerodynamics or structure of your bike. The built-in mount systems provide a simple and clean-looking solution.

Warbird is Salsa's gravel race bike, built on years of experience racing in some of the nation’s premier gravel events. Its carbon fiber frameset, our carefully-honed gravel race geometry, and plentiful mounts for water, tools, and accessories make Warbird a top contender in the gravel bike world. - High-modulus carbon frame with rear thru-axle dropouts and rear rack compatibility via the Salsa Rack-Lock seat collar (sold separately) - Class 5™ Vibration Reduction System (VRS) reduces fatigue caused by micro-impacts - Waxwing Deluxe V2 carbon fork features a 12 x 100mm thru-axle, Three-Pack and fender mounts, mid-blade eyelets, and flat-mount brake standard - Compatible with 700c (45mm maximum) and 650b (51mm maximum) wheels and tires - Compatible with 1x, 2x, and electronic drivetrains - Internal sleeved cable and brake routing; internal dropper post routing with 1x drivetrains - Three water bottle mounts in the main triangle on 56–61cm frames; two on 49–54.5cm frames - Top tube mount for Salsa EXP-R Series Trillium Top Tube Bag and additional mount on underside of down tube - Accommodates a 40mm travel suspension fork

A pure endurance machine, the Infinito answers a need among cyclist for a fast bike you feel like you could ride forever.

A BIKE FOR THE WAY RIDERS RIDE Caledonia doesn’t fit in a box nicely, and we like it that way. It was conceived on our Thursday night rides—routes that often play fast and loose with ‘road ride.’ Modern road riders are looking for bikes to handle long-distance, high pace, no limits, and offer maximum fun—the Caledonia delivers performance, comfort, and speed. Oh, and you can fit a 34mm tire in there. Or 31mm with fenders. REMOVABLE FDM Our bolt-on front derailleur mount is made from high-strength aluminum alloy and attaches to the frame with two countersunk screws. This allows for easy replacement in the event of damage but also enables you to adapt to new standards as they become available or remove the front derailleur mount completely if you choose a 1x system. INTEGRATED ACCESSORY MOUNTS Integrated mounts enable the use of fenders, lights, and computers without compromising the aerodynamics or structure of your bike. The built-in mount systems provide a simple and clean-looking solution.

Warbird is Salsa's gravel race bike, built on years of experience racing in some of the nation’s premier gravel events. Its carbon fiber frameset, our carefully-honed gravel race geometry, and plentiful mounts for water, tools, and accessories make Warbird a top contender in the gravel bike world. - High-modulus carbon frame with rear thru-axle dropouts and rear rack compatibility via the Salsa Rack-Lock seat collar (sold separately) - Class 5™ Vibration Reduction System (VRS) reduces fatigue caused by micro-impacts - Waxwing Deluxe V2 carbon fork features a 12 x 100mm thru-axle, Three-Pack and fender mounts, mid-blade eyelets, and flat-mount brake standard - Compatible with 700c (45mm maximum) and 650b (51mm maximum) wheels and tires - Compatible with 1x, 2x, and electronic drivetrains - Internal sleeved cable and brake routing; internal dropper post routing with 1x drivetrains - Three water bottle mounts in the main triangle on 56–61cm frames; two on 49–54.5cm frames - Top tube mount for Salsa EXP-R Series Trillium Top Tube Bag and additional mount on underside of down tube - Accommodates a 40mm travel suspension fork

**** Bianchi's Sprint is a road bike that effortlessly combines style, performance, and affordability, making it an ideal choice for riders seeking a high-quality, versatile all-around road experience. Whether you're embarking on long-distance adventures or participating in local races, the Bianchi Sprint offers a versatile and agile ride. It also bears the unmistakable mark of Italian craftsmanship, with its captivating design and Bianchi's rich heritage woven into its very fabric. For 2024, the Sprint features internal cable routing. For riders looking to make a statement on the road without compromising performance, the Bianchi Sprint is a testament to the brand's commitment to excellence at an accessible price point.

The Modern Multi Surface Road Bike Meet Alpe d’Huez X – the zenith of agility and expanded possibilities. Engineered for wider road tires, it delivers a smooth ride over rough asphalt and quick acceleration for challenging group rides. Versatile and comfortable, Alpe d’Huez X excels on any route over any road, ensuring you’re ready to do it again tomorrow. What's Included • DEDA S DCR Headset for Semi & Fully-Integrated Cockpits • Front and Rear Thru Axles • Alloy Bottle Bolts • Integrated Seatpost Clamp • Derailleur Hangers • Single Cover and Drivetrain Conversion Kit FRAME MATERIAL BCS Carbon Fiber, Vectran™ and Dyneema® THRU AXLES 12x120x1.5mm Pitch F, 12x159x1.5 SIZES XS, SM, MD, LG, XL SEATPOST DIAMETER ø 27.2mm FORK STEERER TUBE Tapered 1-1/8" to 1-1/2" Vectran™ Enhanced SEATPOST CLAMP Proprietary TIME Alloy HEADSET BEARINGS Top and Bottom 1-1/2" (with internal routing compression ring) SHIFTING Compatible with Electronic and Mechanical Shifting Systems WHEEL SIZE 700c FRONT DERAILLEUR 1X and 2X Compatible with Integrated Single Cover and Drivetrain Conversion Kit MAXIMUM TIRE WIDTH 700 x 38C Road Tire, Optimized for 35C (not all tire/rim combinations fit with adequate clearance - check for appropriate fit) REAR DERAILLEUR Standard Mount BOTTOM BRACKET PF BB386 EVO BRAKE TYPE Front and Rear Flat Mount Disc DISC HUB STANDARD 12x100mm F, 12x142mm R ROTOR SIZE 140mm, 160mm with DM Adapter

Vaya GRX 600 lets you head out for rides that seamlessly cover everything from fresh asphalt to chunky gravel. The triple-butted tubing provides a silky steel ride, and the ability to run high-volume tires adds to the plush factor. Vaya's geometry and cargo-mounting options make it a prime choice for carrying the goods you need for long days in the saddle or light touring loads for multi-day trips. Shimano's GRX 600 drivetrain is a reliable performer no matter what your ride has in store.

Cutthroat is Salsa’s Tour Divide-inspired bikepacking machine. With a lightweight, efficient carbon frameset, ample tire clearance, and thoroughly thought-out mounts for all of your ride and camp essentials, Cutthroat is equally suited to setting records or seeking R&R. - High-modulus carbon frame and fork for ride compliance - Class 5™ Vibration Reduction System (VRS) absorbs micro-impacts on rough roads - Flat mount brakes and internal cable routing on frame and fork - Dropper post-compatible with 1x and 2x drivetrains (2x mechanical drivetrains use external cable droppers) - Clearance for a 29 x 3.0" tire up front and a 29 x 2.4" tire in the rear - Accommodates custom direct-mount frame bags with EXP Series Direct Mount Thumb Screws (not included) for tool-free attachment