Bikes

Rustler C SLX is a 27.5 full suspension mountain bike with a focus on maximizing trail fun. A carbon frame, 27.5" wheels, and geometry designed for a lively ride means this is a bike that comes ready to play. Rustler uses a Split Pivot suspension design for 130 mm of rear travel that is supple over small bumps, supportive on bigger hits, and delivers traction when braking, accelerating, and climbing technical terrain so you're less likely to spin out. Rustler also comes with space for a full-size water bottle and a top tube mount that accommodates all manner of ride accessories. Shimano's proven SLX drivetrain and four-piston brakes keep every ride smooth and reliable. KEY FEATURES: SPLIT PIVOT® REAR SUSPENSION SYSTEM: Split Pivot provides a host of impressive suspension characteristics because the system isolates pedaling forces and braking forces from each other, allowing us to tune and optimize the bike for both independently. The concentric rear axle pivot, in conjunction with precise wheel link, brake link, and control link placement, results in: Excellent bump compliance / Incredible pedaling efficiency / Smooth and predictable braking throughout travel / Maximum traction. ON-BIKE STORAGE: Salsa innovated new bottle and accessory mount placements for added utility and ride range. Our gravel and road bikes have mounts on the top tube and underside of the down tube, plus up to five additional bottle mounts for extra hydration, ride accessories, and bikepacking gear. Our mountain bike line features top tube mounts, mounts on the underside of the down tube on hardtail models, and space for multiple bottles on hardtails and select suspension bikes. FRAME PROTECTION: We use various materials to protect our frames and forks from damage, whether it’s a rock strike on the trail or thick, abrasive mud on your favorite gravel route.

Cassidy SLX is built for more than just getting downhill the fastest. Sure, the 6061-T6 aluminum frame is up for all the trail punishment you can put it through. And the RockShox Super Deluxe Select+ shock and ZEB R fork have your back with 165 mm rear and 180 mm of suspension travel on tap. Cassidy's geometry and our Split Pivot suspension design ensure your tires stick to the trail, whether you're hurtling downhill or climbing back up for another lap. Unlike other enduro bikes, Cassidy features on-bike storage, such as a tube strap spot, a top tube mount, and full-size bottle mount. This lets you extend your ride time or just get the sweaty pack off your back. With a Shimano SLX 1 x 12 drivetrain and four-piston brakes, you're equipped for any enduro course or trail day. KEY FEATURES: SPLIT PIVOT® REAR SUSPENSION SYSTEM: Split Pivot provides a host of impressive suspension characteristics because the system isolates pedaling forces and braking forces from each other, allowing us to tune and optimize the bike for both independently. The concentric rear axle pivot, in conjunction with precise wheel link, brake link, and control link placement, results in: Excellent bump compliance / Incredible pedaling efficiency / Smooth and predictable braking throughout travel / Maximum traction. SPLIT PIVOT + Split Pivot + is our suspension development philosophy that allows riders to swap suspension travel within a single chassis. Flip Chip 2.0 Integrated into the shock link mount, Flip Chip 2.0 allows simple, quick adjustments to bottom bracket height and head tube angle to account for the rider’s personal preference, terrain, or wheel size and tire diameter. MULLET BUILD COMPATIBILITY Mullet build compatibility lets riders run a 29" wheel in the front and a 27.5" wheel in the back with minimal impacts to geometry.

Cutthroat C GRX 810 2x is an immensely capable carbon bikepacking bike, designed and built to be a tour de force on the Tour Divide. Cutthroat's lightweight carbon frame with Class 5 VRS offers a finely tuned blend of stiffness for pedaling efficiency and compliance for all-day comfort. Cutthroat's drop-bar mountain bike geometry is stable when picking your way down steep, loose descents but aggressive enough for enduring a full day of headwinds. Ample cargo mounts add versatility to the way you pack. Shimano's refined GRX 810 2x drivetrain delivers effortless shifting and braking and a wide gear range so you can focus on the view.

Our flagship carbon fiber hardtail: AIR 9 RDO. Niner's purest expression of light, stiff Race Day Optimized carbon fiber rules the racecourse. This efficient yet compliant frame makes the most of carbon's unique properties to give you the best ride, no matter if you're gunning for a podium or cruising local singletrack.

A gravel ride can be whatever you want it to be: go for speed, go for distance, go for fun, go for an escape. No matter your goal, Warbird C GRX 810 2x is a comfortable and efficient way to get there. The carbon frame with Class 5 Vibration Reduction System (VRS) tames harsh roads. Our gravel race geometry grants you control on ruinous roads. Thoughtful mounting points provide places for everything from extra bottles to a light bikepacking setup. Shimano's GRX 810 2x drivetrain has proven itself as a dependable, high-performance gravel group with plenty of gear range for windy flats and steep climbs. Put it all together and you've got one of the best gravel bikes out there.

For those seeking more than just the "Lightest-stiffest-most aerodynamic" road bike experience, Warroad is just the thing. The agile and full-featured carbon fiber frameset is designed with Class 5 VRS for compliance and composure on the rough stuff. Warroad's endurance road geometry is designed for sustained rides, with ample frame and fork mounts for your all-day ride provisions. Designed to accommodate both 700c and 650b wheels, Warroad riders can set up a second wheelset for changing terrain or preferences. Add Shimano's Ultegra components, renowned for light and smooth shifting, and you've got an all-road bike that feels right in every way.

DESIGNED FOR Expert rider who loves to ride fast and in control no matter the terrain. RIDING CONDITIONS Riding on paved and unpaved roads with drops of less than 15 cm. FRAME Arcadex carbon, seat post 31.6mm, thru axle 12x142mm, flat mount disc, pressfit 41, compatible with 42mm tire and mudguard Sizes: XS-S-M-L-XL FORK Full Carbon 1.5" flat mount, disc brake, thru axle 12x100mm HEADSET FSA SMR HS with 1-1/8” custom top cone Bianchi SHIFTERS Campagnolo EKAR REAR DERAILLEUR Campagnolo EKAR 1x13sp CRANKSET FSA Gossamer Pro 40T 1x13 C, Crank Length: 170mm-XS-S, 172.5mm-M-L, 175mm-XL BOTTOM BRACKET Fsa BB-CF86/CZ Stainless bearing for Road carbon / alloy MegaExo crankset Press-Fit 86,5x41 CHAIN Campagnolo EKAR 1x13 CASSETTE Campagnolo EKAR 13s 10-44T BRAKES Campagnolo included in the shifter ROTOR Campagnolo Rotor, AFS 160mm WHEELS Fulcrum Rapid Red 900 DB 2WF-R C22 AFS, alloy, 2-Way fit Ready, rim profile 24mm, width 27,1mm, 28 spokes, HH12- rear HH12/142 N3W TIRE WTB Riddler Race 700 x 37c, Dual DNA Compound, 60tpi Casing STEM Reparto Corse, Alloy 6061 , 1 1/4", raise 0°,Oversize, plastic adaptor for hose cover 1 1/4", finish black; Ext: 80mm-XS -S, 100mm-M, 120mm-L/XL HANDLEBAR Reparto Corse Aluminum 6061, reach 70mm, flare angle 16°, drop cc 120 x size 40cm and 130mm x size 42-44-46cm, size: 40cm=XS/S - 42cm=M/L - 44cm=XL GRIPS La Spirale Ribbon cork SEATPOST Reparto Corse Alloy shaft AL6061, alloy head, 15mm offset, 31,6mm, Length: 300mm/XS; 350mm/S-M-L-XL SADDLE Selle Italia ModelX Superflow FeC, lenght/wide 245x145mm *Based on component availability, Bianchi reserves the right to make changes on specifications without notice.

THREE VARIABLE OPTIMIZED. 1. INSTANT CENTER With the 3VO system's unique virtual pivot characteristics, we're able to combine the efficiency of a hardtail with the proper support of precisely-controlled active suspension. This is how every full-suspension bike should ride. 2. AXLE PATH A rear wheel that stays planted while charging through rough terrain is crucial to providing an intimate connection with the trail. 3VO's initial rearward axle path allows the bike to be supple on small bumps and square edge hits while its tightly tuned relationship with the system's leverage ratio keeps the suspension highly reactive even while pedaling. 3. LEVERAGE RATIO Imagine having two bikes in one, that's essentially what we've got with 3VO. The tuned multi-phase leverage ratio with initial rising rate provides an unparalleled pedaling platform while remaining keenly adept at sustaining repeated bumps without holdup. Up to just beyond the sag point, the system employs a slight rising rate. Some designs claim an initial falling rate with high initial leverage improves sensitivity and responsiveness, but these claims seem more driven by a need to market a deficiency than by any genuine benefit. Why? Because up until the sag point of the bike, sensitivity and responsiveness are primarily felt when the suspension is able to extend, not compress. - Dyad Pro High Modulus Carbon Fiber - 130mm travel 3VO suspension - Enduro Max sealed bearing pivots - Fox Float DPS Performance Series EVOL shock, 3-position compression - Fox 34 Performance Series Float 29”, 3-position adjust compression & lock-out - Stans Flow S1 29” tubeless wheels - Shimano SLX, 12-speed - Shimano SLX 4-piston brakes

Warbird is Salsa's gravel race bike, built on years of experience racing in some of the nation's premier gravel events. Its carbon fiber frameset, our carefully-honed gravel race geometry, and plentiful mounts for water, tools, and accessories make Warbird a top contender in the gravel bike world. - High-modulus carbon frame with rear thru-axle dropouts and rear rack compatibility via Rack-Lock seat collar (sold separately) - Class 5 Vibration Reduction System (VRS) reduces fatigue caused by micro-impacts - Waxwing Deluxe carbon fork features a 12 x 100 mm thru-axle, Three-Pack and fender mounts, mid-blade eyelets, dynamo cable routing, and flat-mount brake standard - Compatible with 700c (45 mm maximum) and 650b (51 mm maximum) wheels and tires - Compatible with 1x, 2x, and electronic drivetrains - Internal sleeved cable routing, dropper post-compatible - Three water bottle mounts in the main triangle on 56–61 cm frames; two on 49–54.5 cm frames - Top tube mount for Salsa EXP Series Direct Mount Top Tube Bag and additional mount on underside of down tube - Accommodates a 40mm travel suspension fork and dropper post with internal routing (on 1x drivetrains only)

Blackthorn SLX is all-mountain with a side of adventure. The stiff and durable aluminum frame uses our progressive trail geometry for a ride feel that's equal parts downhill ripper and stable climber. The Split Pivot suspension design builds on those qualities with supple-to-supportive travel linked to a 140 mm RockShox Super Deluxe Select+ shock. Paired with a 160 mm RockShox Yari RC fork, Blackthorn has the chops for those rugged lines you've been eyeing. On-bike cargo features like the integrated down tube strap, top tube mounts, and a bottle mount let you keep the ride essentials on your bike rather than your back. Shimano's SLX componentry means a smooth-shifting 1 x 12 wide-range drivetrain, while the four-piston brakes offer all the stopping power you'll need. Blackthorn is a clever and capable rig that brings a lot to the all-mountain table. KEY FEATURES: SPLIT PIVOT® REAR SUSPENSION SYSTEM: Split Pivot provides a host of impressive suspension characteristics because the system isolates pedaling forces and braking forces from each other, allowing us to tune and optimize the bike for both independently. The concentric rear axle pivot, in conjunction with precise wheel link, brake link, and control link placement, results in: Excellent bump compliance / Incredible pedaling efficiency / Smooth and predictable braking throughout travel / Maximum traction. SPLIT PIVOT + Split Pivot + is our suspension development philosophy that allows riders to swap suspension travel within a single chassis. Purpose-Tuned Suspension The Blackthorn-specific control link and shock links optimize the frame geometry and kinematics for its suspension travel, delivering a well-rounded, balanced trail feel. Progressive Geometry Blackthorn is long, low, and slack, with a dash of moderation to preserve pedaling performance. A 64.6-degree head tube angle and short-offset fork feel confident when descending loose, steep trails or blasting through rock gardens. A steep 76.5-degree seat tube angle and consistent cockpit sizing makes for a comfortable pedaling position, while the moderate bottom bracket height provides stability at speed without sacrificing pedaling performance in technical sections. The long front center provides stability in extreme terrain while the short 432 mm chainstays make for nimble handling in tight situations. Flip Chip 2.0 Integrated into the shock link mount, Flip Chip 2.0 allows simple, quick adjustments to bottom bracket height and head tube angle to account for the rider’s personal preference, terrain, or wheel size and tire diameter. EPS Carbon Main Triangle with Carbon Seatstays and Aluminum Chainstays EPS construction allows for greater manufacturing control, smooth surfacing, a simplified bottom bracket junction, and an integrated shock mount. Carbon fiber material offers improved stiffness, better vibration damping, excellent toughness and weight savings compared to other materials. 6066-T6 aluminum heat-treated chainstays add durability. Top Tube Accessory Mounts Top tube mounts accommodate K-Edge Top Tube Mount for bike computers or the Salsa EXP Series Direct Mount Top Tube Bag. Down Tube Three-Pack Mounts Three-Pack mounts on down tube accommodate a large water bottle on the lower pair and a frame-mounted pump bracket on the upper pair. Integrated Repair Kit Location Located in front of the rear shock in the front triangle, we provide a dedicated place for a small repair kit, tube, or bag of gummies. No more loading up your pockets or strapping the essentials to random spots on the frame and damaging the frame finish. Carbon frames feature an integrated reinforced slot and frame protection. Aluminum frames feature a machined strap slot. The slot is sized to accommodate most 3/4"- to 1"-wide straps. A Salsa Tube Strap is included with each frame (Salsa Tube Straps are for use with tubes only) Accommodates a 26 oz Bottle All Blackthorn sizes accept a standard 26 oz water bottle within the front triangle. Internal Sleeved Cable Routing Internal tubes guide housing through the frame, simplifying setup and maintenance, and creating a clean bike profile. Molded Frame Protection Molded rubber down tube, seat tube, chainstay, and seatstay guards protect your frame from impacts and abrasion. Chain Guide-Compatible Blackthorn frames feature ISCG-05 mounts for chain guides (removable on carbon frames). Stealth Dropper Post Routing Compatible with 30.9mm dropper posts for true trail bike performance. MULLET BUILD COMPATIBILITY Mullet build compatibility lets riders run a 29" wheel in the front and a 27.5" wheel in the back with minimal impacts to geometry.

The Mukluk is Salsa's most versatile fat bike, designed and engineered to excel in a wide variety of conditions. The frame utilizes 197mm rear spacing to accommodate up to 5" tires, and the 100mm threaded bottom bracket allows a wide range of crank (Q-factor) choices. Alternator 1.0 dropouts allow for short chainstays and easily support single speed or geared drivetrain options. The Mukluk can do it all.

Blackthorn SLX is our 29er all-mountain bike that's perfect when you're not sure what trail has in store, but you know it's going to be steep, gnarly, loose, or all of the above. Progressive geometry comes to life in a 6061-T6 aluminum frame that's built to last. The 140mm rear shock and 160mm fork make for a smooth, balanced, controlled ride when the trail is anything but. Our tried-and-true Split Pivot suspension system delivers superb small-bump compliance, remarkable climbing ability, and limitless traction, even during braking. Shimano's SLX drivetrain and four-piston brakes are exactly the copilots you want when navigating hair-raising rock gardens, high-speed descents, and stiff climbs. Blackthorn SLX is the tool of choice for all-mountain adventures.

Cassidy is the natural evolution of our Split Pivot lineup. The aluminum frame is engineered for hard-charging on huge terrain, and its progressive geometry with 165mm of rear travel and a 180mm RockShox ZEB fork takes the edge off of burly rock gardens, daunting drops, and steep and sketchy trails. The Split Pivot suspension system adds pedaling efficiency and offers smooth, consistent braking throughout the travel for maximum traction. Shimano's SLX components round out the package for precise shifting, while four-piston brakes bail you out of any situation. Cassidy SLX is made for pulling off smooth moves when the terrain is anything but.

NINER RIP 9 RDO-2-STAR *For details on this bike, please call the store. Thanks!

Beargrease pairs a race-ready carbon frame with the capability of fat tires for the ultimate groomed-trail machine. Its trail geometry, dropper post, and 27.5" wheels grant you confidence in loose corners and descents and make for an all-season ripper. Frame and fork mounts for extra bottles and cargo make it easier to gear up for your long days out or even overnighters, and the high-performance XT/SLX drivetrain is the icing on the cake. For light-and-quick confidence on any terrain, Beargrease is one of the best carbon fat-tire bikes out there.

Progressive but racy, ZFS-5 was built for today's evolving XCO courses - it has to pedal well and handle quickly, but also take on the chunks, jumps, and drops littering the circuit. ZFS-5's 67.8-degree head tube angle delivers the precision required for elbow-to-elbow hole shot sprints, and the confidence to let off the brakes when the track gets rough. And in 120mm-outfitting, the 66.6-degree head angle will give you the extra confidence to push harder and ride faster, even when the trail gets a bit...hellish. - Flat Bars, Suspension, Cervelo? World Cup season is here, and we’re all in. The Z bikes—the ZHT-5 and the ZFS-5, our hardtail, and full-suspension, respectively—made their race debut at the Nove Mesto World Cup. The pilots? World Cup veteran and former Dutch National XCO Champion Milan Vader alongside reigning Cyclocross World Champion Fem van Empel. - Call It A Comeback Milan Vader is a veteran XC racer and former Dutch National Champion. He was set to race the Z bikes in 2022, but a life-changing crash at Itzulia Basque Country meant his priorities were re-learning to walk and ride. He’s recovered phenomenally well and much faster than the doctors expected and will be racing the entire World Cup circuit this year. - Double Dutch Fem van Empel is one of Team Jumbo-Visma’s most recent signings, and she’s already made the rainbow connection. Following a decisive World Cyclocross Championships win in Hoogerheide, she traded knobbies for slicks this Spring and has now set her sights on improving her best-ever World Cup results and landing on the podium.

JET 9 RDO 2-STAR SRAM SX EAGLE Specifications Hit the trail on a 2-Star SRAM SX kit, without a hit to your wallet. Thanks to SRAM's outstanding SX Eagle drivetrain, we extract every ounce of JET 9 RDO performance at an affordable price level. Niner alloy wheels, 30mm inner width FOX 34 Float Rhythm GRIP EVOL fork, 130mm travel SRAM Level brakes AVAILABLE FRAME SIZES SM, MD, LG, XL AVAILABLE COLORS MAGNETIC GREY, EMERALD GREEN FRAME NINER RDO CARBON FIBER, CVA SUSPENSION, 120MM TRAVEL, ALUMINUM LINKAGE, ENDURO MAX PIVOT BEARINGS, FULL SLEEVE INTERNAL CABLE ROUTING FORK FOX 34 FLOAT FACTORY GRIP 2 EVOL, HSC, LSC, HSR, LSR, KASHIMA COAT, 130MM, 110X15MM, 44MM OFFSET SHOCK FOX FLOAT X FACTORY EVOL 2 POSITION W/ ADJUST, KASHIMA COAT TUBES / SEALANT FRONT WHEEL DT SWISS XMC 1200 SPLINE, CARBON CLINCHER, 30MM INTERNAL, 110X15MM, CENTERLOCK REAR WHEEL DT SWISS XMC 1200 SPLINE, CARBON CLINCHER, 30MM INTERNAL, 148X12MM, CENTERLOCK, RATCHET EXP 36 FRONT TIRE SCHWALBE NOBBY NIC EVO SUPER TRAIL TLE ADDIX SPEEDGRIP 2.6 REAR TIRE SCHWALBE NOBBY NIC EVO SUPER TRAIL TLE ADDIX SPEEDGRIP 2.35 BRAKES SRAM G2 ULTIMATE BRAKE LEVERS SRAM G2 ULTIMATE BRAKE ROTORS 180/180 HS2 ROTORS CHAIN SRAM XX1 EAGLE 12SP RAINBOW FRONT SHIFTER N/A REAR SHIFTER SRAM AXS EAGLE 12SP FRONT DERAILLEUR N/A REAR DERAILLEUR SRAM X01 AXS EAGLE 12SP WITH BATTERY COVER CASSETTE SRAM EAGLE XG 1299, 10-52T RAINBOW CRANKSET SRAM X1 EAGLE CARBON DUB, 32T (S/M/L - 170MM, XL - 175MM) BOTTOM BRACKET SRAM DUB BSA THREADED SADDLE NINER CUSTOM TR WITH CRN-TI RAILS, PRINTED NINER GRAPHIC SEATPOST KS LEV SI (S-125MM, M-150MM, L/XL-175MM) HANDLEBAR RACE FACE NEXT R 800MM WIDE, 35MM RISE, 35MM CLAMP STEM RACE FACE TURBINE R 40MM, 35MM CLAMP HEADSET NINER INTERNAL ZS SHIS DESCRIPTION ZS44/28.6|ZS56/40 GRIPS NINER GRIPS L/O FLANGED SOFT COMPOUND We make every effort to publish accurate build specs, however Niner Bikes reserves the right to make substitutions or changes to bike assembly specification at any time without notice or warning. Product images may not reflect actual specification. Minor variance in color may be visible including fork decal color. Published approximate weights are for size medium (53cm) and may vary by +/- 15% due to manufacturing tolerances.

Horsethief is one bike for many trails. From finessing local loops to savoring new destinations, Horsethief has your back. It's capable of pushing through technical terrain, instills confidence while riding aggressively, and pairs well with beautiful vistas and a post-ride beverage. - Wheel Size: 29", 27.5+ - Front Axle: 15mm Thru x 110mm - Brake Type: Disc - Fork Type: Suspension - Frame Material: Aluminum - TT (Effective): 636 - Rear Axle: 12mm Thru x 157mm - Frame Type: Suspension - Aluminum frame and Split Pivot suspension design with 120mm of efficient travel, remaining fully active under braking while supportive throughout its travel, paired with a 140mm suspension fork - A short stem paired with a long top tube, combined with a 67-degree head tube angle provides descending confidence, yet balances overall wheelbase length and slow speed maneuverability - Every size fits two full-size bottles in the triangle; Anything Bracket and top tube mounts boost cargo space for pack-free riding bliss - Super Boost 157 x 12mm rear hub spacing combined with a standard width bottom bracket results in a 432mm chainstay length that's 5mm shorter than previous-generations - Rear flip chip adjusts head tube angle and bottom bracket height for terrain, wheel size, and personal preference - Spec'd with a 29 x 2.5'' front and 2.4" rear wheel/tire combination, but can accommodate a range of additional sizes of 27.5 x 2.8 - 3.0" and 29 x 2.2 - 2.6''

Spearfish SLX is part racer, part rowdy. A 6066-T6 aluminum frame holds up to trail abuse, frame bag strap wear, long miles, you name it. Our progressive XC geometry makes descending easy and climbing efficient. Rocky, technical trails are no sweat, thanks to the efficient pedaling, predictable braking, and traction of our Split Pivot suspension design. A 100 mm Fox Float DPS Performance shock and the 120 mm RockShox SID RL fork mellow out harsh trails to reduce fatigue on long rides. Spearfish's on-bike cargo features, such as two-bottle capacity and top tube mounts, allow for longer rides between resupply points or just an extra lap before heading back to the car. Add Shimano's SLX 1 x 12 components to the mix, and you have an aluminum XC bike that you can rely on through tough racecourses and mellow loops alike.

Rustler SLX is designed from the ground up to be a playful trail bike. An aluminum frame, responsive trail geometry, and the agility of 27.5" wheels mean you can get creative with the trail features. Rustler's Split Pivot suspension design makes the most of its 130 mm of rear travel and is active while accelerating, braking, and climbing for reliable traction. Shimano's SLX drivetrain performs smoothly ride after ride, and the four-piston hydraulic brakes bring the action to a halt when you need it. With space for a full-size water bottle and a top tube mount for ride accessories, it's easier to keep the fun rolling. KEY FEATURES: SPLIT PIVOT® REAR SUSPENSION SYSTEM: Split Pivot provides a host of impressive suspension characteristics because the system isolates pedaling forces and braking forces from each other, allowing us to tune and optimize the bike for both independently. The concentric rear axle pivot, in conjunction with precise wheel link, brake link, and control link placement, results in: Excellent bump compliance / Incredible pedaling efficiency / Smooth and predictable braking throughout travel / Maximum traction. ON-BIKE STORAGE: Salsa innovated new bottle and accessory mount placements for added utility and ride range. Our gravel and road bikes have mounts on the top tube and underside of the down tube, plus up to five additional bottle mounts for extra hydration, ride accessories, and bikepacking gear. Our mountain bike line features top tube mounts, mounts on the underside of the down tube on hardtail models, and space for multiple bottles on hardtails and select suspension bikes. FRAME PROTECTION: We use various materials to protect our frames and forks from damage, whether it’s a rock strike on the trail or thick, abrasive mud on your favorite gravel route.

Beargrease is our fat tire bike built to go faster than you knew fat tire bikes could go. The super-light frame and fork and the sure-footed rollover of 27.5 x 4.0" wheels and tires cover challenging terrain quickly. Versatile frame and fork mounts let you carry everything you need for the backcountry. Test yourself in a snowy endurance race or pack your camping gear and embark on a long-distance overnight bike trip.

The Blackthorn C frame blends a stiff carbon fiber chassis with our progressive trail geometry and Split Pivot suspension design. The result is a well-balanced platform for an all-mountain bike that descends with gusto, rails through features, and makes climbing up for lap two as painless as possible. The Fox Float X Factory shock delivers 140 mm of travel to guide you through whatever the trail serves up. On-bike cargo features hold your tube, pump, and repair kit, and more on the frame to lighten up your hip pack—or allow you to ride pack-free. We made Blackthorn C the best all-mountain bike frame around. Take it and make it your dream bike.

Nobody knows what you like as well as you do. When you're hurtling down the trail at high speed, everything needs to be dialed. With 165mm of rear travel, plus our Split Pivot suspension system for pedaling efficiency and consistent braking traction, Cassidy is easy-up, easy-down. Take the Cassidy Carbon Frame, hand-select your dream team of parts, and build the enduro sled you've always wanted.

Stormchaser is Salsa's gravel bike for any and all conditions. Ample tire clearance and the single speed-compatible Alternator Flat Mount dropout system will see you through the muddiest rides. Equipped with a suspension fork and dropper post, the Stormchaser GRX 810 1x SUS lets you get rowdy with your route choices.

Salsa Blackthorn Deore brings together performance and adventure. The aluminum frame is stiff enough to keep you on your line and durable enough to toss in a truck bed for shuttling. Our progressive geometry and Split Pivot suspension design offer a well-balanced platform for pedaling, descending, and taking on technical features. A 140 mm RockShox Super Deluxe Select shock and 160 mm RockShox 35 Gold RL fork ensure plenty of travel for gnarly drops, gaps, and other features. On-bike cargo features like a down tube strap, top tube mounts, and a bottle mount let you keep the weight of your ride gear down low on the frame so you're free to move your body without the burden of a pack. With Shimano's robust Deore 1 x 12 drivetrain backing you up, you'll find very few limits out there. Blackthorn Deore is the 29er all-mountain bike for big rides on diverse terrain. KEY FEATURES: SPLIT PIVOT® REAR SUSPENSION SYSTEM: Split Pivot provides a host of impressive suspension characteristics because the system isolates pedaling forces and braking forces from each other, allowing us to tune and optimize the bike for both independently. The concentric rear axle pivot, in conjunction with precise wheel link, brake link, and control link placement, results in: Excellent bump compliance / Incredible pedaling efficiency / Smooth and predictable braking throughout travel / Maximum traction. SPLIT PIVOT + Split Pivot + is our suspension development philosophy that allows riders to swap suspension travel within a single chassis. PURPOSE-TUNED SUSPENSION The Blackthorn-specific control link and shock links optimize the frame geometry and kinematics for its suspension travel, delivering a well-rounded, balanced trail feel. PROGRESSIVE GEOMETRY Blackthorn is long, low, and slack, with a dash of moderation to preserve pedaling performance. A 64.6-degree head tube angle and short-offset fork feel confident when descending loose, steep trails or blasting through rock gardens. A steep 76.5-degree seat tube angle and consistent cockpit sizing makes for a comfortable pedaling position, while the moderate bottom bracket height provides stability at speed without sacrificing pedaling performance in technical sections. The long front center provides stability in extreme terrain while the short 432 mm chainstays make for nimble handling in tight situations. FLIP CHIP 2.0 Integrated into the shock link mount, Flip Chip 2.0 allows simple, quick adjustments to bottom bracket height and head tube angle to account for the rider’s personal preference, terrain, or wheel size and tire diameter. EPS CARBON MAIN TRIANGLE WITH CARBON SEATSTAYS AND ALUMINUM CHAINSTAYS EPS construction allows for greater manufacturing control, smooth surfacing, a simplified bottom bracket junction, and an integrated shock mount. Carbon fiber material offers improved stiffness, better vibration damping, excellent toughness and weight savings compared to other materials. 6066-T6 aluminum heat-treated chainstays add durability. TOP TUBE ACCESSORY MOUNTS Top tube mounts accommodate K-Edge Top Tube Mount for bike computers or the Salsa EXP Series Direct Mount Top Tube Bag. DOWN TUBE THREE-PACK MOUNTS Three-Pack mounts on down tube accommodate a large water bottle on the lower pair and a frame-mounted pump bracket on the upper pair. INTEGRATED REPAIR KIT LOCATION Located in front of the rear shock in the front triangle, we provide a dedicated place for a small repair kit, tube, or bag of gummies. No more loading up your pockets or strapping the essentials to random spots on the frame and damaging the frame finish. Carbon frames feature an integrated reinforced slot and frame protection. Aluminum frames feature a machined strap slot. The slot is sized to accommodate most 3/4"- to 1"-wide straps. A Salsa Tube Strap is included with each frame (Salsa Tube Straps are for use with tubes only) ACCOMMODATES A 26 OZ BOTTLE All Blackthorn sizes accept a standard 26 oz water bottle within the front triangle. INTERNAL SLEEVED CABLE ROUTING Internal tubes guide housing through the frame, simplifying setup and maintenance, and creating a clean bike profile. MOLDED FRAME PROTECTION Molded rubber down tube, seat tube, chainstay, and seatstay guards protect your frame from impacts and abrasion. MULLET BUILD COMPATIBILITY Mullet build compatibility lets riders run a 29" wheel in the front and a 27.5" wheel in the back with minimal impacts to geometry. CHAIN GUIDE-COMPATIBLE Blackthorn frames feature ISCG-05 mounts for chain guides (removable on carbon frames). STEALTH DROPPER POST ROUTING Compatible with 30.9mm dropper posts for true trail bike performance.

Expand your gravel adventures with the Confluence GRX600 2x. This gravel e-bike features a lightweight MAHLE hub-drive system that puts down 40Nm of torque in a stealthy package. The aluminum frame and carbon fork balance weight, comfort, and performance. Confluence’s geometry is designed for a comfortable, stable ride, even at higher average speeds than you’re used to on bumpy backroads. Confluence also comes with our on-bike cargo features, allowing for quick and easy configuration for adventures ranging from gravel day rides to last-minute bikepacking trips. All this, paired with Shimano’s GRX600 2x drivetrain, means you’ll have the tools to pull off more rides than ever. Charge Your Adventure with Confluence GRX600 1x. Features: - 6061-T6 alloy frame Confluence’s aluminum alloy tubing is developed specifically for the Confluence frame and is heat-treated to T6 alloy standards for extra strength and durability. - Carbon fiber fork The Confluence Carbon fork is lightweight, comfortable, cargo-ready, and gives you loads of tire clearance to play with. - MAHLE X35+ Class 1 hub-drive system This Class 1 rear hub-drive motor delivers electric assist up to 20mph/32kph. It’s one of the lightest e-bike systems on the market, and its low-profile appearance means that Confluence looks like a regular gravel bike. - 40Nm max torque Up to 40Nm of assist that feels natural, not overwhelming. The MAHLE X35+ system offers three assist levels, and sensors detect when you’re pedaling to moderate the level of support generated at the hub. - 250Wh internal battery You can’t see it, but you’ll certainly feel it. MAHLE’s 250Wh battery is nestled inside Confluence’s downtube. This battery size hits the ideal combination of efficiency and weight for what we designed Confluence to do - Capable of up to 458Wh with MAHLE Range Extender battery? (sold separately) Easily increase your range for bigger adventures with a Range Extender battery available from MAHLE. - iWOC One compact remote top tube controller Minimal and intuitive controller displays battery status and allows you to cycle through assist modes with one button. - Connected if you want to be The MAHLE system offers Ant+ connectivity for third-party devices and Bluetooth® for app integration. MAHLE’s MySmartBike app allows for customization, metrics, mapping, and more. - Massive 700c x 50mm tire clearance Confluence fits up to 700c x 50mm tires, so you can ride those lesser-traveled tracks. 700c x 42mm maximum tire clearance when equipped with fenders. - On-bike cargo features Attach front and rear racks to your Confluence for serious cargo capacity, or use the sleeker Three-Pack mounts for extra water bottles or our EXP Series Anything Cage HD to pack a cooking kit, extra layers, or whatever dream up.

Built for the rigors of America's longest mountain bike race, the Tour Divide-inspired Cutthroat C GRX 600 1x is one of the best bikepacking bikes for long rides through a variety of conditions and surfaces when speed is of the essence. Designed with drop-bar mountain bike geometry and a lightweight carbon frame featuring our Class 5™ VRS for comfortable compliance, Cutthroat is ready to put in big miles on any terrain. Ample cargo mounts let you distribute weight evenly around the bike for maximum maneuverability. Shimano's GRX 600 1x drivetrain provides brilliant braking and shifting with the gear range for gravel flats and mountain passes alike.

Warbird C GRX 600 1x is a carbon gravel bike designed to win races, but it’s built for much more than just speed. The compliant carbon frame with our gravel bike geometry and Class 5™ Vibration Reduction System (VRS) is comfortable on unmaintained roads. Extra cargo mounts on the fork, top tube, and down tube allow you to push more miles between resupplies or take light and fast bikepacking journeys. Dual wheel size compatibility gives you options for dialing in ride setups based on the course at hand. Shimano’s acclaimed GRX 600 1x group tops it all off with smooth and predictable performance on roads that are anything but. There are thousands of miles of backroads waiting to be explored—let Warbird be your guide. FRAMESET Frame Warbird Carbon Fork Waxwing Color Light Gray Rear Shock N/A DRIVETRAIN Front Derailleur N/A Rear Derailleur Shimano GRX RX812 Cassette Shimano M5100, 11–42t, 11-speed Chain Shimano HG601 Crankset Shimano GRX RX600, 40t -OR- FSA Omega MegaExo, 40t Shifter Shimano GRX RX600 Brakes and Rotors Shimano GRX RX400 brakes, Shimano RT64 rotors (Center Lock, 160 mm) COMPONENTS Headset Cane Creek 40 Stem Salsa Guide Handlebar Salsa Cowbell Grips/Bar Tape Anti-Slip Silicone handlebar tape Seatpost Salsa Guide Saddle WTB SL8 Medium Steel SL WHEELS Front Wheel Shimano RS470 12 x 100 mm hub -OR- Novatec D981SB-CL-12 12 x 100 mm hub, WTB ST i23 TCS rim, 28h Rear Wheel Shimano RS470 12 x 142 mm hub -OR- Novatec D982TSB-CL-X12 12 x 142 mm hub, WTB ST i23 TCS rim, 28h Tires Teravail Cannonball 700c x 42 mm, tubeless compatible, Durable casing WEIGHT Complete Bike Weight 21 lb 8 oz (56 cm frame) *Specification and pricing subject to change without notice.

Warbird is Salsa's gravel race bike, built on years of experience racing in some of the nation's premier gravel events. Its carbon fiber frameset, our carefully-honed gravel race geometry, and plentiful mounts for water, tools, and accessories make Warbird a top contender in the gravel bike world. - High-modulus carbon frame with rear thru-axle dropouts and rear rack compatibility via Rack-Lock seat collar (sold separately) - Class 5™ Vibration Reduction System (VRS) reduces fatigue caused by micro-impacts - Waxwing carbon fork featuring a 12 x 100mm thru-axle, Three-Pack and fender mounts, mid-blade eyelets, dynamo cable routing, and flat-mount brake standard - Compatible with 700c (45 mm maximum) and 650b (51 mm maximum) wheels and tires - Compatible with 1x, 2x, and electronic drivetrains - Internal sleeved cable routing, dropper post-compatible - Three water bottle mounts in the main triangle on 56–61 cm frames; two on 49–54.5 cm frames - Top tube mount for Salsa EXP Series Direct Mount Top Tube Bag and additional mount on the underside of the down tube - Accommodates a 40mm travel suspension fork and dropper post with internal routing (on 1x drivetrains only)

The Salsa Heyday! C Deore 12 is a carbon fat-tire bike with the versatility to go wherever your imagination takes you. The carbon-fiber frame keeps weight down — especially nice when you’re hefting it over downed trees deep in the backcountry. The 26 x 4.6? tires float over snow, sand, and other soft surfaces, but you can also fit 27.5 fat and 29+ wheels and tires for other missions. A mind-blowing number of cargo and accessory mounts let you bring more than just the bare necessities, and Heyday!’s geometry ensures a stable ride even when loaded. Alternator 2.0 dropouts allow for multiple drivetrain options, but the stock Shimano Deore 12-speed is the perfect place to start.